The New Suzuki Quadracer HQ Welcomes All LT500 Quadzilla, LT250, LTR450, LTZ400, LTZ250, LT80 owners to the Suzuki Quadracer HQ forums
No they will not be made from 3d printer. They will be machined from a billet piece of material.I couldn't find an o-ring that would work without having some custom made. I am going to make some from paper gasket.I only have 10 bowls for sale. I am making 12 and keeping a pair for me. The company I got my billet piece from me required a minimum price per line order for each piece of billet material and the price point came out to 12 for the adapter piece and 10 for the bowl. Plus machining 12 of the same piece is cheaper per a piece than just 2.
If you can't see the reason behind not using metal for those parts, it isn't worth explaining. Oh wait, I already told the reason.
You again don't see it. These are not for the average quad. These are for those that have already shaved a lot of weight off there quad.These are not for a 390lb zilla, these are for the sub 300lb hybrids and drag quads.I know the nylon screws will provide enough clamping force to seal.
ZFNice rendering on the bowl. Just a few questions.Are these setup to only run on PWK carbs? - Currently these will only bolt up to a PWK carb and some PJ carbs to my knowledge. I don't have a TM carb to check bolt pattern and fitment. If I could find a TM carb, I could design up an adapter plate that matches the bowl to the TM carb.What is the function for the top nipple? Sorry I'm a bit slow. Top nipple is the overflow fitting.Have you thought of making it out of one piece instead of using an adapter plate? I have thought about this, but really can't. Many reasons, one being access to the 4 bolts to tighten them down between the carb and plate. Second is machining, will be hard to machine the bowl to size when you have a small limited access. If casting/injection molded, this could work, but not for machining.Just wondering...Keep generating ideas.LT
By inlet, do you mean an inlet for gas?As for the o-ring, custom o-rings from mcmaster are $9, so that is another $20 for a bowl.
http://www.suzukiquadracerhq.com/index.php?action=store