Take the 4 screw out of the bottom then you take out the jets the brass pieces,One sticks out and the other needs a small flat head screw diver to take it out.Spray carb cleaner in their and soak it.The blow the jets carefully with a air compresser.Then blow out where the jets went in the carb,Then turn the carb over to the oval side going to the airbox and blow air threw the 3 little holes.Do this a few times to make sure its clean.Well then put jets back in and put the bowl on .Then put it back on the quad .Also you will have to take the little screw out of the top where the cable goes in the carb.To remove the slide should have said this step first.Hope this help you