Not a whole lot to update really....

Got my front hubs sand blasted yesterday. Gotta little blue left over that I got get off then I think I'm gunna do all the outer edges on a wire wheel and leave the inner parts the bead blasted  finish. I dunno,,,   Mated up with the zinc coated front disks I got from Tony last year I think they are gunna look good after doing some file work



Also got in the hydraulic clutch assembly


But it's gunna be a pain to retro fit it. I gotta make/mod either a clutch arm that will go to the end on the clutch rod,, or make a end for the clutch rod that will work with the stock clutch pull arm. Also, the fitting on the slave cylinder is TINY

So I gotta find something that's the same size, so I can get a longer hose made. This hose on it is BARELY long enough for my 110....

OH!!  And I finished up the other a-arm, getting it cut down and filed smooth I mean. Slapped it up into the frame for mock up

After I found the other camber shim. Which it was in its bag, in the box it came in.... And I thought I had put it somewhere where I wouldn't lose it........ Jeez....
HUGE!!!!!! THANKS!!!!!! To 1986Quadracer, Patrick, he sent me the lower ball joint I needed!

I'm gunna have to get stickers made of everyones's username to put on this machine. Y'all are like sponsors for a special Olympics race team lmfao!!

Waiting on the shocks and spring to get here from All American, then gunna instantly send the rear shock to Mr. George over at Suspension 101 to get some magic done.

But that's ALL banking on if Ol Ugly sells....



Speaking of stickers:
Not only do I need usernames made into stickers, but either a large Heinz 57 or Heinz 87 as a name badge sticker.

What sounds better: Heinz 57 or Heinz 87?