Author Topic: Chuckies 'Heinz 57' LT250R (Read 8549 times)

Chuckie25 · « **Reply #50 on:** November 22, 2013, 08:05:38 pm »

Oh yea i know i can heli-coil it,, i have the helicoils already. but I took the lazy way out and put a nut and bolt on it.

Chuckie25 · « **Reply #51 on:** November 23, 2013, 07:12:44 pm »

arite i told y'all i would post the full wiring harness picture as well as a cut down "race" harness picture... Dont kill me if it looks like crap but its the best i can do with my limited photoshop (read that "microsoft paint") skills

Hopefully these will actually help someone..

Chuckie25 · « **Reply #52 on:** November 25, 2013, 01:54:36 pm »

Chuckie25 · « **Reply #53 on:** January 14, 2014, 01:53:45 pm »

Ok I didn't wanna post the pictures until I had AA completely paid off for the front shocks but here's how the bike sits with the new shocks, a-arms, rear tires/wheels, nose and rear shock

I need to get some 20" MX fronts for it for sure. The 21's are HUGE compared to the 18's in the back.

But for now it's going together with the 20" rears so I'm not too worried about it. I'm gunna get a new chain and 13 tooth front sprocket so I can have a chain for the 36t / 18" combo and for the 42t / 20" combo. But yeap. That's about it.

But the swingarm is coming out the bike as soon as I can afford a pivot bearing kit. It NEEDS to be replaced. Gunna rob the 88 frames rear end for this one.

Buckeye513 · « **Reply #54 on:** January 14, 2014, 03:22:08 pm »

Looks really good CJ specially with them jerry rigged a arms! Lol jk man bike looks sick I love the Zilla hood on it will fit even better if you ever make it a hybrid!

Dezsled · « **Reply #55 on:** January 14, 2014, 05:26:45 pm »

Looks great chuckie ... They used to use grooved Riken radial car tires up front for flat track back when. Nice bead locks

GrkGuy · « **Reply #56 on:** January 14, 2014, 07:24:29 pm »

dammmmmmmmmmmmmm Chuck.. its about time for a hair cut.... lol

bike is looking good, so how about a pic from the front so you can show everyone how wide front tires stick out past the rears.

Chuckie25 · « **Reply #57 on:** January 14, 2014, 07:40:42 pm »

Jeez..... Had to bust my cover did ya...
Lmao

I've since re-angled the bars so they don't look so retarded.

Thanks for the kind words y'all!! I'm hoping to be able to ride ye olde beast again sometime this year

GrkGuy · « **Reply #58 on:** January 15, 2014, 05:58:19 am »

looks good, so how high is it in the front now.

Chuckie25 · « **Reply #59 on:** January 15, 2014, 04:34:20 pm »

Quote from: GrkGuy on January 15, 2014, 05:58:19 am

looks good, so how high is it in the front now.

About 15 1/2" from the ground to the bottom of the frame rail

Chuckie25 · « **Reply #60 on:** January 15, 2014, 08:22:59 pm »

And this is why I enjoy being a hoarder

Chuckie25 · « **Reply #61 on:** January 16, 2014, 05:18:30 pm »

And on the next day, Chuckie said "Let there be a tight ass in this ride." And so there was.

I even had an unused chain slider for it laying around

Dutch_Rutter · « **Reply #62 on:** January 16, 2014, 05:26:37 pm »

Wow sounds like your all kinds of set up. NEVER what happens to me. she is looking good though Chuck good work

Chuckie25 · « **Reply #63 on:** January 16, 2014, 07:24:48 pm »

Quote from: Dutch_Rutter on January 16, 2014, 05:26:37 pm

Wow sounds like your all kinds of set up. NEVER what happens to me. she is looking good though Chuck good work

Man it only comes from hoarding parts and buying crap no one else would. The 88 rolling chassis I stole the swinger out of sat for sale for almost 3 months before I bought it. Then it's been sitting at my uncles for about 9 months.

LT250RWV · « **Reply #64 on:** January 17, 2014, 12:49:34 am »

By the way chuck your shock are triple rate .

Chuckie25 · « **Reply #65 on:** January 28, 2014, 09:35:52 pm »

Oh yes!!!

Chuckie25 · « **Reply #66 on:** March 08, 2014, 10:52:10 am »

Hopefully my YFZ hubs come in today....

Chuckie25 · « **Reply #67 on:** March 08, 2014, 04:01:29 pm »

My YFZ hubs came in today!

Still gotta put the 36 tooth rear sprocket and new 13 tooth front with new chain on it but she looks fuggin fiiinnneeeeee. Definitely gunna try and get it cleaned up and posed for a good picture.

PCS · « **Reply #68 on:** March 09, 2014, 04:57:17 am »

How bout you color match your wheels too

Chuckie25 · « **Reply #69 on:** March 09, 2014, 08:01:33 am »

Quote from: PCS on March 09, 2014, 04:57:17 am

How bout you color match your wheels too

I'm either gunna get a set of HiPer's for the from or some Douglas

Chuckie25 · « **Reply #70 on:** March 19, 2014, 05:09:52 pm »

Got the new 13/36 sprockets on, the new chain, trimmed front fenders and the low profile rears on it today. Still gotta bust another link out the chain but I need a half link to put it back together so I didn't worry about it yet.

Buckeye513 · « **Reply #71 on:** March 19, 2014, 06:51:16 pm »

I liked it better before the fender trim up front. Did you get the pipe fixed?

Chuckie25 · « **Reply #72 on:** March 19, 2014, 07:08:26 pm »

Quote from: Buckeye513 on March 19, 2014, 06:51:16 pm

I liked it better before the fender trim up front. Did you get the pipe fixed?

I'll know of the cut fenders are staying or not after I ride it again lol that's why I have two sets of fronts.
And no not yet, gotta find someone that can weld something thin like a pipe. Then getting it rechromed

GrkGuy · « **Reply #73 on:** March 19, 2014, 07:34:07 pm »

i think you want it tig welded, ny someone that knows what they are doing/.

LTman · « **Reply #74 on:** March 19, 2014, 07:42:20 pm »

where did it beak at the flange

News:

Author Topic: Chuckies 'Heinz 57' LT250R (Read 8549 times)

Suzuki Quadracer HQ Store Zone