Author Topic: Stator reading (Read 1105 times)

Chuckie25 · « **on:** March 03, 2014, 08:29:57 pm »

Hey y'all,, what ohm's should a good 91/92 source and pickup coil read?

Also, what's the correct way to check them? I need to figure out why this bike has no spark. I'm 99% sure I rewired it correctly but still nothing.

Thanks!!

Buckeye513 · « **Reply #1 on:** March 03, 2014, 08:31:23 pm »

Open the manual to the electrical section idiot.

Chuckie25 · « **Reply #2 on:** March 03, 2014, 08:39:12 pm »

Quote from: Buckeye513 on March 03, 2014, 08:31:23 pm

Open the manual to the electrical section idiot.

The manual I have doesn't have the electrical section in it, sweetheart. It's from '88 and has a few pages missing. Can't find my new book anywhere

Chuckie25 · « **Reply #3 on:** March 03, 2014, 08:45:51 pm »

Found it elsewhere's on the internet:

85/86 is:

Pickup Coil - black and black/white - 480-720 ohms
Source coil - black/red and black/white - 330-500 ohms
Lighting cool - black/red and black/white - 0.5-1.0 ohms

87+ is:

Pickup coil - black and black/white - 175-265 ohms
Source coil - black/red and black/white - 315-475 ohms
Lighting coil - yellow/red and black/white - 0.5-1.0 ohms

Buckeye513 · « **Reply #4 on:** March 03, 2014, 08:50:28 pm »

Here you go retard page 116.

http://www.mediafire.com/view/?onjk7f4773f0eu3

Chuckie25 · « **Reply #5 on:** March 03, 2014, 08:52:37 pm »

Quote from: Buckeye513 on March 03, 2014, 08:50:28 pm

Here you go retard

http://www.mediafire.com/view/?onjk7f4773f0eu3

Already have it and have it posted for use by future members, little one.

Buckeye513 · « **Reply #6 on:** March 03, 2014, 08:55:03 pm »

Oh you have the manual file posted for future members? Because that's what I just posted you tard you know in case someone has a question about something else that's in the manual but doesn't have the section of the manual they need.

Chuckie25 · « **Reply #7 on:** March 03, 2014, 08:58:55 pm »

Quote from: Buckeye513 on March 03, 2014, 08:55:03 pm

Oh you have the manual file posted for future members? Because that's what I just posted you tard you know in case someone has a question about something else that's in the manual but doesn't have the section of the manual they need.

No I have the information that this thread is ABOUT posted for future reference.

GrkGuy · « **Reply #8 on:** March 05, 2014, 07:27:14 am »

black/red to black/white = 375 ohms
blue to black/white = 120 ohms

this is for the zilla, but i think they are all the same.

Chuckie25 · « **Reply #9 on:** March 05, 2014, 10:32:36 am »

Quote from: GrkGuy on March 05, 2014, 07:27:14 am

black/red to black/white = 375 ohms
blue to black/white = 120 ohms

this is for the zilla, but i think they are all the same.

Cool deal!

Can a mod come through and delete Fuckeye and I's irrelevant post and then sticky this?

LT250RWV · « **Reply #10 on:** March 05, 2014, 10:41:34 am »

This is going to the both of you. You both need to quit taking pokes and shots at each other. Or this crap isn't going to stop. Ive seen the post that's started all this. Both are in the wrong. So just drop it and let it go Please!

Dezsled · « **Reply #11 on:** March 05, 2014, 10:54:14 am »

Phuckeye...

Hilarious!

Yeah mods will be busy here

Buckeye513 · « **Reply #12 on:** March 05, 2014, 11:21:49 am »

Calm down phuckie!

Chuckie25 · « **Reply #13 on:** March 05, 2014, 11:29:42 am »

Quote from: Buckeye513 on March 05, 2014, 11:21:49 am

Calm down phuckie!

Quote from: Buckeye513 on March 05, 2014, 11:21:49 am

Calm down phuckie!

Quote from: Buckeye513 on March 05, 2014, 11:21:49 am

Calm down phuckie!

Sorry Phuckeye, you got the F now bud. Non-transferable unless you wanna pay a $200 fine lmao

Buckeye513 · « **Reply #14 on:** March 05, 2014, 11:31:00 am »

Trying to creatively raise money with your broke ass! Lmao cute

Chuckie25 · « **Reply #15 on:** March 05, 2014, 11:35:33 am »

Quote from: Buckeye513 on March 05, 2014, 11:31:00 am

Trying to creatively raise money with your broke ass! Lmao cute

HAHAHA!!! Basically!

Honestly dude, you don't bother me with your chitty remarks and digs. They just plain suck lmao. But you do trash up the site a LOT. This thread is a very good example.

El Diablo · « **Reply #16 on:** March 05, 2014, 11:52:51 am »

Are you guys done yet?

Chuckie25 · « **Reply #17 on:** March 05, 2014, 12:03:12 pm »

Just checked the stator on my bike and the 92 and it came up to:

My 87:

Source - 343
Pickup - 206 (which is lower than what the book says but my bike runs like a top?)

92:

Source - 357
Pickup - 206

Now, the book says to test pickup you go black to black/white BUT neither of these have a black wire. There's a blue wire and that's what I tested off of.

So did I mess up or something when testing? I know for a fact that my bike rubs as has spark, but this 92 doesn't have spark and I'm 100% sure I wired it correctly

Buckeye513 · « **Reply #18 on:** March 05, 2014, 12:51:58 pm »

How exactly do I trash up the site? I posted the entire file for a 250 manual to help you answer your question... Seems more productive then your question thread. And you're the one that started with the digs and chitty remarks to begin with I posted a black and yellow music video to be funny and you continued to try and belittle me with insults and put me down. It's cool man I'm so much above you it's not funny. You just seem upset that your trolling insults have followed you here. You're a fake little ass kisser and I'm not the only one who thinks that... see just like you I get messages and texts of people clowning on how ridiculous and hypocritical you are along with another hypocrite named Gillio.

Buckeye513 · « **Reply #19 on:** March 05, 2014, 12:52:16 pm »

Now I'm done Brian (El Diablo).

El Diablo · « **Reply #20 on:** March 05, 2014, 01:31:50 pm »

Thank you gentlemen.

Chuckie25 · « **Reply #21 on:** March 05, 2014, 01:32:10 pm »

Finally figured out what was up. The DUMBAZZ PO had the kill switch wires twisted together up by the handle bars. Found that and WALA, SPARK! And she runs!!

Gillio · « **Reply #22 on:** March 05, 2014, 02:13:02 pm »

Hypocrite. Lol I've been call many names by bucky in the past few days without any returned. But I'm the hypocrite.... Do you even own a dictionary bro?

Sorry to all who have to sift through all the trash on here to find the relavent info that brought them here. But seems to be a common denominator In all the petty arguments and bickering ...
Now Im done.

Buckeye513 · « **Reply #23 on:** March 05, 2014, 02:26:25 pm »

Do you even know the definition of hypocrite bro? It's not somebody who calls people names just so you know.

1 : a person who puts on a false appearance of or religion 2 : a person who acts in contradiction to his or her stated beliefs or feelings

This applies to you in the manner that you constantly state that you don't like all the bantering and drama yet you constantly stick your nose in the middle of other peoples discussions thus involving yourself in the bantering and drama that you claim to not approve of. EFFIN hypocrite! Example A my comment about it sucking to be poor directed at phuckie. You felt the need to involve yourself in that conversation.

Deebo · « **Reply #24 on:** March 05, 2014, 03:51:11 pm »

Awesome... hypocrite is the reading I should get on my pick up coil?

News:

Author Topic: Stator reading (Read 1105 times)

Suzuki Quadracer HQ Store Zone