Author Topic: gasket suface (Read 395 times)

Jsmitty42 · « **on:** October 24, 2013, 11:14:26 am »

how clean does the gasket suface have to be and how do you clean it properly

Iceracer · « **Reply #1 on:** October 24, 2013, 11:47:27 am »

Depends what your using oring or gasket. best way to clean is with a new razor blade and PATIENCE. you have to get all the old gasket off, without gouging the cylinder. you can use a piece of fine scotchbrite and brake cleaner by hand but never with any power tools. and only work around the bore never at or away from it. lomg smooth motions so notto create a low spot.

Nekrofilliak · « **Reply #2 on:** October 24, 2013, 12:14:56 pm »

i don't know if it this best , but after cleaning old gasket with a blade and solvent. i use a thick window glass piece and a 1000 grid sandpaper. i fix the sandpaper to the glass ans resurface a little to get it clean near perfect.