Author Topic: K&N filters (Read 1040 times)

Buckeye513 · « **on:** April 30, 2013, 09:24:44 am »

Just wanted to post this up as I've been shopping for a k&n for my build. This is the cheapest I've found and these are genuine authentic k&n filters. Including 5 links to some popular different sizes. These are all 4" ID flange filters.

7" length
http://autoplicity.com/products/235198-k_n_rc_4680_universal_chrome_filter.aspx

7" length with larger base and top diameters
http://autoplicity.com/products/235199-k_n_rf_1032_universal_air_filter.aspx

7.5" length
http://autoplicity.com/products/411037-k_n_rf_1007_universal_air_filter.aspx

8" length
http://autoplicity.com/products/364642-k_n_rf_1046_universal_air_filter.aspx

9" length for you crazies out there
http://autoplicity.com/products/252547-k_n_re_0870_universal_rubber_filter.aspx

Dezsled · « **Reply #1 on:** April 30, 2013, 11:39:33 am »

Man those prices are nice. Ha-4250 is around $45 + usually.

Buckeye513 · « **Reply #2 on:** April 30, 2013, 12:03:09 pm »

Yeah Dez I've looked high and low and this site these are on has tons of k&n filters all at great prices. I think there's like 3240 different filters and accessories for k&n alone. They also have other brands aem and spectre to name a couple. There's also smaller sizes for guys running the stock air box with sblt500's adapter just gotta do your own digging for those. I'm looking to fab my own custom air box that removes quickly to leave the filter still rigidly mounted so thinking of making it to fit an 8".

BadMoonRacing500 · « **Reply #3 on:** April 30, 2013, 09:20:36 pm »

I like the AEM brute force filters, flow better, filter better, cost less. Every hi performance vehicle I own Is slowly being switched, including the race cars and quad racers.

Quadzilla_NY · « **Reply #4 on:** April 30, 2013, 09:48:40 pm »

I've got a k&n 40 shipped if you want it

Buckeye513 · « **Reply #5 on:** May 01, 2013, 03:24:33 am »

What size k&n zill_ny? And badmoon I can't find the brute force 7" or larger for as cheap as I found these k&n's for.

Quadzilla_NY · « **Reply #6 on:** May 01, 2013, 06:38:01 am »

Base is 6 inches wide and its 5 1/4 long

Buckeye513 · « **Reply #7 on:** May 01, 2013, 07:11:36 am »

No thanks man goin with 7-8" length 5-6" base 4" id flange.

Buckeye513 · « **Reply #8 on:** May 01, 2013, 07:21:03 am »

Dez here's your ha 4250 $19.20 plus shipping.

http://autoplicity.com/products/68012-k_n_ha_4250_replacement_air_filter.aspx

Dezsled · « **Reply #9 on:** May 01, 2013, 08:06:35 am »

Wow that's cheap! Thanks buck nice find

Buckeye513 · « **Reply #10 on:** May 01, 2013, 09:30:52 am »

No problem Dez

All American · « **Reply #11 on:** May 01, 2013, 03:19:27 pm »

What filter would you recommend for a stock 86'? I was thinking about sending my engine off to get some mods done, such as water pump assy. replaced possibly big bore and cool heads, port too. If I have these mods done should I be using a bigger filter than stock?

LT250RWV · « **Reply #12 on:** May 01, 2013, 03:40:26 pm »

I dont think they make a coolhead for the 86 all you need to do is have the head mod done some porting good carb good filter and pipe.

All American · « **Reply #13 on:** May 02, 2013, 02:43:46 pm »

What do you think that would cost?

LT250RWV · « **Reply #14 on:** May 02, 2013, 03:36:57 pm »

porting the head mod and a new bore would be around 750$ Then pipe and carb would be around another 400 to 500$ depends if you want new ones. Im sure their is cheaper builder then what i listed. But that is what im about to pay for my work im having done to my 88 cylinder.

Buckeye513 · « **Reply #15 on:** May 02, 2013, 04:09:16 pm »

Email Matt Hatfield Racing he's a wiz with the 250's and good prices if you're not in a hurry. mhr@matthatfieldracing.com he can do all your machine work make you a custom air box can even make you a pipe.

Now quit

LT250RWV · « **Reply #16 on:** May 02, 2013, 04:26:17 pm »

Contact Iceracer on here all American he set up the best 250r. All the thread you hijacked Buckeye Come on Man!!!

SBLT500R · « **Reply #17 on:** May 02, 2013, 04:56:00 pm »

those are some cheap filters.

lets see a mhr airbox? never seen one. probably looks like mine.

there is or was a shop that made cool heads for the 85-86. remember seeing them years ago.

Dezsled · « **Reply #18 on:** May 02, 2013, 05:19:08 pm »

Shawn post a pic of your airbox, it's a work of art!

Buckeye513 · « **Reply #19 on:** May 02, 2013, 06:38:29 pm »

I need to see a picture of one of Shawn's 500 air boxes I haven't begun fabbing mine up yet.

Buckeye513 · « **Reply #20 on:** May 03, 2013, 07:08:15 am »

Just ordered a 9" k&n go big or go home right?!! When it gets in ill start fabrication of my air box. I'm probably going to make more than one out of diamond plate aluminum if anyone is interested once I get it finished.

All American · « **Reply #21 on:** May 03, 2013, 07:44:46 am »

I'm new to this forum stuff, and don't really know the norms, sorry if I ask questions off topic guys. This is my first forum. Still learning.

Buckeye513 · « **Reply #22 on:** May 03, 2013, 07:45:49 am »

No big deal man I was kidding with the

comment. Cause I'm like the master ninja at that shiznit around here! Lol

All American · « **Reply #23 on:** May 03, 2013, 09:35:33 pm »

Buckeye513 · « **Reply #24 on:** May 07, 2013, 07:10:00 am »

Ordered Friday delivered Monday dang that was fast! This mother effer is humongous!!

News:

Author Topic: K&N filters (Read 1040 times)

Suzuki Quadracer HQ Store Zone