+-

Author Topic: Extended Wheel Hubs For The Zilla?  (Read 697 times)

Offline Frank

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Extended Wheel Hubs For The Zilla?
« on: November 01, 2012, 03:15:40 pm »
anyone knows how build these extendet wheel hubs for zilla 5 bolt ?
suzukiquadracerhq

under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Share on Facebook Share on Twitter


Offline Mitch Keller

  • Mitch Keller
  • Trade Count: (0)
  • Administrator
  • Trail Blazer
  • *****
  • Posts: 799
  • Love The Smell Of 927 and Race Fuel In The Morning
  • Location: Riverside Ca
Re: extendet wheel hubs for the zilla?
« Reply #1 on: November 01, 2012, 03:18:58 pm »
Only 4 Bolt are made
F Mitch Keller

Offline Frank

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: extendet wheel hubs for the zilla?
« Reply #2 on: November 01, 2012, 04:02:15 pm »
and Spacers for zilla 5 bolt?
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline Q2W

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1386
  • Gender: Male
  • Location: NWA
Re: extendet wheel hubs for the zilla?
« Reply #3 on: November 01, 2012, 04:02:50 pm »
a lot of us run those hubs on our 500s.   Just use the 4 bolt suzuki pattern 4/110.

Offline El Diablo

  • Sandaholic
  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1194
  • Gender: Male
  • Sandaholic / speed addict
  • Location: Yuma, Arizona
Re: extendet wheel hubs for the zilla?
« Reply #4 on: November 01, 2012, 07:08:13 pm »
What you have pictured are hubs made by G-force. As far as I know, they are only available in 4 lug. If you really want to keep it 5 lug, look around & try to find some Lonestar Racing hubs for your bike. I'm not sure if they are still being made but if you can find them, they will widen your bike about .75" per side. I use them on my 500.
Brian
1988 Suzuki LT-250R (The HPR test mule)
1987 Suzuki LT-500R
1990 Suzuki LT-500R
1982 Honda ATC-185S
1982 Honda ATC-250R

Offline Mitch Keller

  • Mitch Keller
  • Trade Count: (0)
  • Administrator
  • Trail Blazer
  • *****
  • Posts: 799
  • Love The Smell Of 927 and Race Fuel In The Morning
  • Location: Riverside Ca
Re: extendet wheel hubs for the zilla?
« Reply #5 on: November 01, 2012, 07:10:55 pm »
See the pics listed, they hold my Fluffy Back Side up.

http://www.suzukiquadracerhq.com/chassis-suspension/g-force-extended-hubs-to-widen-the-rear-axle-*-for-newbies-*/
F Mitch Keller

Offline WestTexasKing

  • The Most
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1119
  • Kills: 9007
  • Location: Monahans TX
Re: Extended Wheel Hubs For The Zilla?
« Reply #6 on: November 02, 2012, 01:58:55 am »
Your only viable option for getting a wider rear axle and the 5 bolt pattern is to buy a wider rear axle.
Stud spacers aren't strong enough, don't even bother with them.

Offline ZillaInNC

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 9
  • Gender: Male
  • Location: Greensboro, NC
Re: Extended Wheel Hubs For The Zilla?
« Reply #7 on: November 09, 2012, 08:44:48 am »
I bought a set of the G-Force Z400 Hubs to put on my Zilla but I haven't gotten a set of 4 lug beadlocks yet so I haven't installed them. Anyone have a set of 4 lug rear wheels they are willing to part with for the right price let me know. Thanks.

Offline Dezsled

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: Extended Wheel Hubs For The Zilla?
« Reply #8 on: November 09, 2012, 08:51:51 am »
Those extended hubs look great. Better than spending $424 plus shipping off feebay
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline Glamisrider

  • Trade Count: (0)
  • Forum Moderator
  • Pro Member
  • *********
  • Posts: 860
  • Gender: Male
  • Location: SoCal
Re: Extended Wheel Hubs For The Zilla?
« Reply #9 on: November 09, 2012, 07:59:43 pm »
Zilla hub is 26 spline same as the Z400 or you can also use the LTR450 hubs which are .75 wider and you can use a small spacer.

The hubs pictured are the G-force as mention above for the Z 400 which is a 26 spline axle and I believe they widen it 3 inches over all.

FYI; On some LT250s they re also 26 spline (I believe they are the later years 87+) and some are the 24 spline which are the same as the banshee so I believe you can run Banshee hubs on a 24 spline LT250.

One of you 250 guys want to confirm this?

Offline El Diablo

  • Sandaholic
  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1194
  • Gender: Male
  • Sandaholic / speed addict
  • Location: Yuma, Arizona
Re: Extended Wheel Hubs For The Zilla?
« Reply #10 on: November 09, 2012, 08:24:02 pm »
Zilla hub is 26 spline same as the Z400 or you can also use the LTR450 hubs which are .75 wider and you can use a small spacer.

The hubs pictured are the G-force as mention above for the Z 400 which is a 26 spline axle and I believe they widen it 3 inches over all.

FYI; On some LT250s they re also 26 spline (I believe they are the later years 87+) and some are the 24 spline which are the same as the banshee so I believe you can run Banshee hubs on a 24 spline LT250.

One of you 250 guys want to confirm this?

Bret, this is true.
Brian
1988 Suzuki LT-250R (The HPR test mule)
1987 Suzuki LT-500R
1990 Suzuki LT-500R
1982 Honda ATC-185S
1982 Honda ATC-250R

Offline Frank

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: Extended Wheel Hubs For The Zilla?
« Reply #11 on: November 10, 2012, 01:29:51 am »
http://www.ebay.de/itm/280750033948?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

i found this on e-bay is the price ok ?
and and fits all the OEM hubs ?  for Breake ,Sproket, Wheel,and Bearings?
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline WestTexasKing

  • The Most
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1119
  • Kills: 9007
  • Location: Monahans TX
Re: Extended Wheel Hubs For The Zilla?
« Reply #12 on: November 10, 2012, 03:33:50 am »
Everything fits on the durablue, it's designed to be a direct replacement extended axle.
I've seen them go for less, but it's a matter of finding them on sale or buying used.
Might see if yuzuha32 has a lead for a cheaper supply?

Offline Glamisrider

  • Trade Count: (0)
  • Forum Moderator
  • Pro Member
  • *********
  • Posts: 860
  • Gender: Male
  • Location: SoCal
Re: Extended Wheel Hubs For The Zilla?
« Reply #13 on: November 10, 2012, 06:38:53 am »
I would ask Q2W before I buy one of these I think he has one and if I remember right they are pretty heavy???

Also the zilla has the largest diameter axle out there at 50mm so you won't get any beefier than stock unless you go to a JJ&A drag axle.

For the money I'd go with either a set of the LTR 450 with either .25 or .375 spacers (you can buy from Druablue for $20) or the Gforce which can be bought for around $110 unless you really want an aftermarket axle.

I just think there is many more places you could spend $300 bucks on performance.

Offline Frank

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: Extended Wheel Hubs For The Zilla?
« Reply #14 on: November 10, 2012, 10:35:00 am »
What is to do?
Wheel spacers looks like a amateur
To widen a bit the axle.
i have 4 x 5 hole rims
i can't put them in the trash!
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline Dezsled

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: Extended Wheel Hubs For The Zilla?
« Reply #15 on: November 10, 2012, 10:55:04 am »
I have a rpm dominator ll +4" on the honda and it is heavy. Those extended hubs look sweet. Sell those 5 lug bead saver rims & score some 4 lug itp T-9 baja rims/ omf bead saver rims with the money you save not buying the expensive axle.
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store