Author Topic: Best Source For Billet Washers And The RM Bearing? (Read 1135 times)

MD2smoker · « **on:** December 11, 2012, 04:54:42 pm »

Well, the wife has asked me to write a "Zilla Wish List". I told her she would have a heart attack if she wanted to see everything I want to do. So I just started with the basics for my winter rebuild. whats a good source for the washers and bearing? I have found only one seller on ebay and he didnt have the bearing. I am tring to get as much as possible from one source.
I.e. washers, bearing, gasket kit ( cometic?) . Thanks

Mitch Keller · « **Reply #1 on:** December 11, 2012, 05:22:48 pm »

Get the AFM gaskets from Cometic, hit up Yuzuha32 for the RM bearing, think HPR and or Bartlett Racing can help you on the Billet Washers.

http://www.suzukiquadracerhq.com/engine-13/cometic-pn-for-the-afm-gaskets/

Stpltn250r · « **Reply #2 on:** December 11, 2012, 06:24:55 pm »

chrisg makes the ones on ebay

MD2smoker · « **Reply #3 on:** December 11, 2012, 06:36:03 pm »

Can I get the afm gaskets for base, reed, head and pv window or only side cases?

Iceracer · « **Reply #4 on:** December 12, 2012, 07:17:23 am »

Head gasket is not Afm the others yes. I Have washers and base gaskets, have to look on the rm bearing I should but may be out at the moment.

Megacablongbox · « **Reply #5 on:** December 12, 2012, 03:51:00 pm »

Quote from: Iceracer on December 12, 2012, 07:17:23 am

Head gasket is not Afm the others yes. I Have washers and base gaskets, have to look on the rm bearing I should but may be out at the moment.

I need the washers and the rm bearing if you extra? $$$$? Thanks

Rider414 · « **Reply #6 on:** December 12, 2012, 04:42:15 pm »

I have not seen the ebay spacers in awhile? I saw Roidzilla but not the spacers.

Dirtzilla · « **Reply #7 on:** December 12, 2012, 05:16:42 pm »

chrisg always has billet washers on ebay, his username is wrench_2007
fast shipping

http://www.ebay.com/itm/Billet-Thrust-Washers-lt500-Quadzilla-lt250-quadracer-/180635646327?hash=item2a0eb93977&item=180635646327&pt=Motors_ATV_Parts_Accessories&vxp=mtr

Rainman56 · « **Reply #8 on:** December 12, 2012, 06:57:57 pm »

I know JH sells them as well.

SBLT500R · « **Reply #9 on:** December 12, 2012, 09:38:07 pm »

call up cometic for the rcm gaskets.

i've made my own washers. are these cnc'ed that are being sold or hand made?

Mitch Keller · « **Reply #10 on:** January 10, 2013, 10:14:59 pm »

Just make sure the Aluminum Billet Washers are made from #7075 alloy or better, any lower grade like #6061 alloy might be too soft.

Stpltn250r · « **Reply #11 on:** January 10, 2013, 10:23:00 pm »

Pretty sure Chris had them rockwell tested and they checked out ok.

Iceracer · « **Reply #12 on:** January 11, 2013, 06:03:48 am »

I dont remember the alloy fairly sure there 7075, but the ones I have here are the same as the ones that have been in my bike for 8+ years. Not run so much the last couple years, but a lot of hard miles on them in the beginning and no signs of measurable wear yet.

GrkGuy · « **Reply #13 on:** January 11, 2013, 07:40:00 am »

i run chrisg's washers, no sign of wear on them.
and chris is a great guy to deal with.

Sublunacy · « **Reply #14 on:** February 21, 2013, 05:22:12 am »

Can anyone confirm that they are not needed. To what degree I ask? Sounds logical if the engine is with spec. Old worn out parts and it could be a headache? Anyone?

Mitch Keller · « **Reply #15 on:** February 21, 2013, 11:54:05 am »

I am having a quote on making 50 sets to sell in the SQ-HQ store made from 7075 Aluminum.

Sublunacy · « **Reply #16 on:** February 22, 2013, 04:26:44 am »

the definition of a bearing requires no moving parts. it describes a soft metal against harder metal. The soft metal wears instead of the component you are shielding from rotation.

what I am describing is the problem with your fancy 7000 series aluminum. It is the hardest of all the aluminums off the top of my head. So perhaps our silcon infused pistons are hard but what about its wearing specs? will the piston be the bearing? I suspect that's what you will get Sir!

SBLT500R · « **Reply #17 on:** February 22, 2013, 06:24:49 am »

i don't think you understand where the washers go. or i'm reading you wrong. there is only side to side play, really no pressure on them, they just keep the rod centered.

LT250RWV · « **Reply #18 on:** February 22, 2013, 08:29:12 am »

Have you guys seen the titanium one that use the stock needle rollers. Acjracing on ebay sell them.He is wanted 49.50$ a set.They look pretty nice.

Sublunacy · « **Reply #19 on:** February 22, 2013, 08:37:37 am »

I understand perfectly. You do not. Your bearing is harder than your piston and rod. SOOOOO now the piston and rod is the bearing. The actual bearing however will wear the least. Congratulations you have turned physics inside out. Don't tamper with me .

brass has fantastic wear capability. It is up to the designer to utilize it. It self lubricates I believe. Im not a Encyclopedia!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Buuuut 2023 aluminum would surely fix your dilemma.

Don't shoot the messenger. Reread my definition till you turn blue in the face doesn't stop me from being 90 percent correct here.

Iceracer · « **Reply #20 on:** February 22, 2013, 09:47:01 am »

Sublunacy, you are absolutely mis reading this whole thing. There is no physics needed.
SIMPLY PUT.the oem washers are a step design.and use a wider bearing they are case hardnend and thin therefore they egg and break .
The aluminum washers have no step and use a narrower bearing. All they do is center the rod, the rod is centered by the piston and washersup top.
IN 10 years I have only used one set of washers in my engine with no measurable wear.

MD2smoker · « **Reply #21 on:** February 22, 2013, 10:59:12 am »

Sublunacy, have you ever taken apart the top end of a qr? You will see that the thrust washers in question only keep the rod centered on the wrist pin. The needle bearing is what takes the force when the engine is running.
BTW thanks for the help from the other members on here. I picked up the washers, bearing and afm gaskets from Hpr. Cylinder is getting bored now, hopefully have the zilla back together and running by next weekend.

El Diablo · « **Reply #22 on:** February 22, 2013, 12:00:55 pm »

I'm not too smart, but I think that the aluminum washers are alittle softer than the OEM steel ones that they are replacing.

Sublunacy, you are pretty much correct when you say that bearings are a soft metal that rides against a harder metal. This is what the auto manufacturers have been doing for years for engine bearings (lead, copper, & babbit). They are able to handle lots of stress without failure. However in the wristpin application on the LT engine, only the needle bearings spin. The washers just sit there & take up space. They see very little movement.

Mitch Keller · « **Reply #23 on:** February 22, 2013, 12:25:04 pm »

I will be selling the Alum #7075 thrust washers in the store for $22.00 set "Shipped" having them made as I type, should be in the store next week, also , Jayson will be selling these in a piston kit also.

LT250RWV · « **Reply #24 on:** February 22, 2013, 01:45:09 pm »

How about this, How exactly does the posi-trac rear end on a Plymouth work!? It just does.

News:

Author Topic: Best Source For Billet Washers And The RM Bearing? (Read 1135 times)

Suzuki Quadracer HQ Store Zone