+-

Author Topic: 38 vs 42.5 mm  (Read 4084 times)

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 249
Re: 38 vs 42.5 mm
« Reply #25 on: November 22, 2013, 09:46:42 pm »
I'm running 7DH3 needle.. check your needle jet.. mine is an AA0.  That really cleaned things up vs the AA5.  Adjusting the Idle tells you a lot about the pilot size but also listen for the "ring ding ding ding" after a high RPM throttle blip... if your hearing that its a lean condition caused by to small a pilot jet and can hurt the motor.

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store