+-

Author Topic: 1992 250 rear shock  (Read 394 times)

Offline Andys92

  • Trade Count: (0)
  • Range Rover
  • *****
  • Posts: 468
  • Gender: Male
  • Location: roscoe NY
1992 250 rear shock
« on: January 07, 2013, 11:49:57 am »
just noticed the bearing (?) at bottom of rear shock is shot.Have looked all over  ,my clymer only does up to 1990 swing arm  and all website s i have looked at is the same .none have a oem 1992 picture which shows 1992 linkage. i need proper name or part number for the replacement  bearing where the bottom of the rear shock attaches. i will keep looking but i must be doing or calling it the wrong name or something. Thanks in advance.
Lonestar outlaw lrd ported 265 national ,custom dynoport exhaust etc
1992 hybrid,Bartlett trail port ,custom dynoport
Lonestar lt250. Bartlett 285 with curtis sparks porting and custom dynoport

Share on Facebook Share on Twitter


Offline LT250RWV

  • 1991 Lt250r
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1350
  • Gender: Male
  • Location: West Virginia
Re: 1992 250 rear shock
« Reply #1 on: January 07, 2013, 01:42:32 pm »
Is it the linkage or the shock bearing i had same problem with mine But it was the shock bearing on mine ..Is it  where  shock open and slides over the linkage because it  takes the same bearing as the 87 to 90 shock bearing. But it is in the linkage instead of the shock like the 87 to 90 models. PART THE OME parts number for the bearing is 62175-00B00 but its like 44 dollars and you have to get 2  oem parts  62657-34A01 which are clips Then you need to dust seal parts number is 62226-28C00    Also you need a  2 Spacer  parts number is 62684-28C10 .You would have more money in buying oem parts for this bearing then going to
Ebay and buying a whole 91 -92 shock linkage kit for your quad.Like i said if your bearing is bad where the shock slides over.You can buy a 87 to 90 shock beaRING KIT OFF EBAY FOR LIKE 20$ or so alot cheaper the going OME parts
91 Lt250r Bartlett port and head mod v force 2 Hinson Clutch Basket Cool Head Scp Pipe and silencer ,KN air filter ,EBC clutch, Ohlins  Triple rate Shocks Redone by PEP Shocks,Stock Rear Shock Redone By Pep Shock,  DG nerf Bars , Lonestar axle 2+2,Lonestar Swingarm ,Douglas Red Label rims.

Offline Iceracer

  • CEO BRP
  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 772
  • BRaP Small block 302, Released and Running
Re: 1992 250 rear shock
« Reply #2 on: January 07, 2013, 01:53:58 pm »
Its called a. cushion lever.

Offline Andys92

  • Trade Count: (0)
  • Range Rover
  • *****
  • Posts: 468
  • Gender: Male
  • Location: roscoe NY
Re: 1992 250 rear shock
« Reply #3 on: January 07, 2013, 07:34:18 pm »
lt250rwv. yes it is where the shock slides over the linkage. thanks for letting me know about the bearings .
iceracer . also thanks .i had no idea it was called a cushion lever .

  thanks .
Lonestar outlaw lrd ported 265 national ,custom dynoport exhaust etc
1992 hybrid,Bartlett trail port ,custom dynoport
Lonestar lt250. Bartlett 285 with curtis sparks porting and custom dynoport

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store