Author Topic: i must say, i like this AAEN pipe!!! (Read 3038 times)

Dragzilla346 · « **on:** June 02, 2013, 04:17:29 pm »

just got my AAEN pipe all mounted up and ready to ride. coming from a PT pipe to this, the gains up top was well worth what i paid for it. definitely pulls harder than the PT, im excited to see how much it improved my 300' time at the end of the month!!! the fitment was not too bad, had to do some tweaking but never had to cut and reweld the mid pipe like some have. just thought id share this and heres a pic of it mounted up

Rider414 · « **Reply #1 on:** June 02, 2013, 04:22:57 pm »

Looks nice!

Dezsled · « **Reply #2 on:** June 02, 2013, 04:38:44 pm »

That Aaen pipe looks like its better produced, the welds look hammered & rolled compared to the one I've seen.

Gillio · « **Reply #3 on:** June 02, 2013, 04:58:06 pm »

How did it fit? Any "modifications" to it?

Buckeye513 · « **Reply #4 on:** June 02, 2013, 05:29:26 pm »

Gillio read his post.

Dragzilla346 · « **Reply #5 on:** June 02, 2013, 05:35:23 pm »

since my quad didnt have the rubber pipe mounts when i bought it, and one of the mount bolts was seized in the frame, i had to make my own pipe brackets to bolt it to the frame. the mid pipe comes a bit close to the frame right where it connects to the silencer, but the silencer bolted up nicely. and yea it does look like the welds were hammered down or done better than some ive seen. only real complaint i have is where the silencer couples to the mid pipe is a bit loose.

CorvetteZ06 · « **Reply #6 on:** June 02, 2013, 06:23:24 pm »

ive got the same exhaust, ceramic coated... fit was good on mine, the only thing was that one of the silener mounting holes doesnt line up.. your exhaust looks great man!! Looking forward to hearing your ride review, and if there is actually any difference in your 300 time just from a change of exhaust from the PT you had on prior.

Rainman56 · « **Reply #7 on:** June 02, 2013, 07:58:42 pm »

Nice,looking forward to the review as well.

Cunningham_821 · « **Reply #8 on:** June 02, 2013, 08:06:51 pm »

I see alot of lbs to be lost on that bike to go with the better pipe. i sent you a message a while back drag did you get my #?

WestTexasKing · « **Reply #9 on:** June 02, 2013, 08:16:27 pm »

They may have hammered the welds a bit, but it still looks like there's a lot of hard angles for the first 3 or 4 bends.
Are you by chance running lean?
Your header pipe looks really blue...

GrkGuy · « **Reply #10 on:** June 03, 2013, 07:03:10 am »

dont forget to rejet

Gillio · « **Reply #11 on:** June 03, 2013, 07:07:50 am »

Quote from: Buckeye513 on June 02, 2013, 05:29:26 pm

Gillio read his post.

I did, Ninja editing strikes again. Bet you didn't see his reply before it was inserted into the original post.

Buckeye513 · « **Reply #12 on:** June 03, 2013, 07:21:18 am »

I read the thread before anyone posted in it and I saw the comments about fitment my first read through.

Gillio · « **Reply #13 on:** June 03, 2013, 07:34:26 am »

Would you like a gold star then?

Buckeye513 · « **Reply #14 on:** June 03, 2013, 07:53:38 am »

I'd prefer a cookie but as long as the gold star is a button and not a sticker I'll take it!

Gillio · « **Reply #15 on:** June 03, 2013, 08:41:18 am »

Not sure what happened. Could have swore there was a second post on it. IDK maybe i'm mistaken. who cares

Dirtzilla · « **Reply #16 on:** June 03, 2013, 10:25:13 am »

i don't find the welds to be any different than pipes from a couple years ago

Dezsled · « **Reply #17 on:** June 03, 2013, 11:11:28 am »

The areas where the welds are blended in better not as angular/choppy.

Bottom of the page

http://www.aaenperformance.com/Acces_P4.asp

The pipes performance speaks for itself, I heard its a very strong top end pipe good choice

Mitch Keller · « **Reply #18 on:** June 03, 2013, 11:51:22 am »

Just FYI on buying a coned pipe, some pics , I have some of my DCS-4 cut open, I will take some pic of the inside to show whats done inside a cone pipe.
DCS-4

HPR-19

Deebo · « **Reply #19 on:** June 03, 2013, 01:19:17 pm »

Shameless self promotion?

Mitch Keller · « **Reply #20 on:** June 03, 2013, 02:26:52 pm »

Hang On Ill put a Hall Pipe up also , make ya feel better Deebo......

WestTexasKing · « **Reply #21 on:** June 03, 2013, 02:27:55 pm »

It's better than shameful self-promotion.

Mitch Keller · « **Reply #22 on:** June 03, 2013, 02:41:49 pm »

Quote from: WestTexasKing on June 03, 2013, 02:27:55 pm

It's better than shameful self-promotion.

Thats next month

JayTater · « **Reply #23 on:** June 03, 2013, 04:01:13 pm »

Quote from: Mitch Keller on June 03, 2013, 02:41:49 pm

Quote from: WestTexasKing on June 03, 2013, 02:27:55 pm
It's better than shameful self-promotion.

Thats next month

I'm sure that Mitch is completely shameless..

Mitch Keller · « **Reply #24 on:** June 03, 2013, 06:15:55 pm »

Got that right

News:

Author Topic: i must say, i like this AAEN pipe!!! (Read 3038 times)

Suzuki Quadracer HQ Store Zone