Author Topic: EXHAUST MANIFOLD GASKET RINGS - Where from? (Read 917 times)

AustenW · « **on:** January 29, 2014, 03:41:23 am »

I'm running a V1 q pipe with the alloy flange

Jug has been ported to match the ID of the flange

Looking for a gasket ring to fit it

These are the dimensions I took with my calipers the other night that would fit snug

57.85mm od x 47mm id x 4.5mm thick

Mitch Keller · « **Reply #1 on:** January 29, 2014, 07:09:51 am »

The OEM one doesn't fit??

AustenW · « **Reply #2 on:** January 29, 2014, 07:38:57 am »

The engine didn't come with one fitted and I assumed that because I've ported the exhaust port out to 47mm od to suit the flange the oem gasket would be less than that

I've ordered one anyway, so ill have a look and see how I get on

Dezsled · « **Reply #3 on:** January 29, 2014, 10:41:58 am »

Here's the v2, v1 and hpr19 flanges.

Q2W · « **Reply #4 on:** January 29, 2014, 11:04:14 am »

Dezsled, i think he's talking about the asbestos gasket.

Iceracer · « **Reply #5 on:** January 29, 2014, 11:53:22 am »

machine an aluminum one and use a oring. that gasket is worthless, all flanges should have a lip machined to use a oring in there and eliminate the gasket. All it does is cause turbulence and collect carbon.

Nopick · « **Reply #6 on:** January 29, 2014, 02:14:17 pm »

HPR 19 flange sets back in the gasket groove doesn't it??

Mitch Keller · « **Reply #7 on:** January 29, 2014, 02:27:37 pm »

Quote from: Iceracer on January 29, 2014, 11:53:22 am

machine an aluminum one and use a oring. that gasket is worthless, all flanges should have a lip machined to use a oring in there and eliminate the gasket. All it does is cause turbulence and collect carbon.

Maybe another item for the store??? Wonder what temp that area gets to, a o ring might melt past 450 deg.

Dezsled · « **Reply #8 on:** January 29, 2014, 05:16:52 pm »

Quote from: Nopick on January 29, 2014, 02:14:17 pm

HPR 19 flange sets back in the gasket groove doesn't it??

Yes it does, no need for no stinkin' gasket

Glamisrider · « **Reply #9 on:** February 04, 2014, 08:13:59 am »

Quote from: Mitch Keller on January 29, 2014, 02:27:37 pm

Maybe another item for the store??? Wonder what temp that area gets to, a o ring might melt past 450 deg.

Look at the viton specs, that might work

HPR does not require a gasket but the Q pipes do.

News:

Author Topic: EXHAUST MANIFOLD GASKET RINGS - Where from? (Read 917 times)

AustenW

EXHAUST MANIFOLD GASKET RINGS - Where from?

Mitch Keller

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

AustenW

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Dezsled

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Q2W

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Iceracer

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Nopick

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Mitch Keller

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Dezsled

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Glamisrider

Re: EXHAUST MANIFOLD GASKET RINGS - Where from?

Suzuki Quadracer HQ Store Zone