-
About To Buy A AAEN Pipe, Which Silencer Should I Get??
Posted by
Dragzilla346
on 29 Apr, 2013 19:17
-
i just about have enough saved back to buy a pipe, looking at the AAEN, but dont know which silencer i should get cause they list a few. looking for the better one for performance.
-
-
-
I got the ceramic coated pipe with regular silencer, its nice 580.00 shipped to my door. Its is loud imo, so if you are in a area that gets checked, or have neighbors that are within 1/2 mile lol maybe opt for mega silencer? mine fit just fine, but some were having fitment issues. best bang for your buck imo
-
-
-
oh and remember you may need a sparky too!
-
-
-
im setting it up for drags so noise isnt an issue, and if it doesnt fit perfect, ill make it fit like it should with some gool ol fabrication and welding lol. im gonna opt for the raw finish for the time being. and i wont need a sparky
-
-
#4 Reply
Posted by
Dezsled
on 29 Apr, 2013 19:53
-
should look into mitch's DCS 5 too
-
-
#5 Reply
Posted by
STARPUSS
on 29 Apr, 2013 21:02
-
if you want to Drag race , Why install a Silencer at all?
I am not going to run one with mine when it's done.
(Note: I am going to Buy the DCS 5 ) And Run a pipe to the back where the silencer should be.
-
-
-
Get the small silencer, the big one with the sparky is known too be to restrictive and pops motors.
-
-
#7 Reply
Posted by
Dirtzilla
on 29 Apr, 2013 23:12
-
here is the 2 different ones available, i could sell you the sparky silencer cheap if you want it, its brand
new, as far as i know ,only one guy on here said the Aaen sparky silencer was too restrictive.
the 3 inch one is much cheaper and looks alot better anyways, imo.
-
-
#8 Reply
Posted by
Deebo
on 30 Apr, 2013 13:46
-
I'm not sure if they offer the larger can style silencer anymore. I could be wrong though
-
-
#9 Reply
Posted by
Dezsled
on 30 Apr, 2013 16:10
-
Man those are some burly mounting brackets on that first silencer!
-
-
#10 Reply
Posted by
Dirtzilla
on 30 Apr, 2013 17:17
-
Yeah the mounting tabs broke after a few rough rides, i
Took it to a welding shop and said can you put some gussets to beef it up
that's what i got, lol
It will never break again
-
-
-
There has been many people that have found the sparky silencer to restrictive including JH. That was a Joe Rock wanting bling silencer.
-
-
#12 Reply
Posted by
Dirtzilla
on 30 Apr, 2013 20:52
-
Worse part about it is they don't come polished or ceramic coated like the pipes do , lol
-
-
-
Worse part about it is they don't come polished or ceramic coated like the pipes do , lol
They will ceramic coat them if you wan't inside and out. I personally don't like ceramic on a 2 stroke pipe. It holds a lot of unwanted heat in the pipe. I like plain, with a good seasoning of atf on it, or chrome/nickel plate. I have the First new style AAEN pipe ever made. it's a hybrid pipe, my frame is the one the jig was built from. The zilla pipe came later and was built off a tweaked chassis, hence the fitment issue with the zilla pipe. Joe Rock wanted a shiny, big sparky silencer for SL and thats where the 2nd silencer version came from.
-
-
#14 Reply
Posted by
Dirtzilla
on 30 Apr, 2013 22:16
-
well since you just got a new Aaen,how about you buy that sparky for a special price and see how it works, LOL
just kidding,
last summer when i checked, they were selling those for $ 150,ouch.!!
the 3 inch silencer was $ 70 i think,
-
-
#15 Reply
Posted by
Dirtzilla
on 30 Apr, 2013 22:31
-
my Aaen is ceramic coated, i bought it 2 years ago, i was not aware of the heat retention factor back then. It still looks like new tho, i really like the look of the ceramic, not to blingy.
-
-
-
well since you just got a new Aaen,how about you buy that sparky for a special price and see how it works
It's not a new pipe
It is the first Q style AAEN pipe ever made, it's about 3 years old. As for the sparky silencer from AAEN..... Junk...
-
-
#17 Reply
Posted by
Dirtzilla
on 30 Apr, 2013 23:39
-
-
-
-
-
-
-
Really anything you bolt on Either AAEN, Q V1 or V2 and the HPR19, yeah Ill plug the DCS-5, will be a warp drive jump over a FMF, Bills, CT, Trinity exhaust system, pick what you want for the performance you want and affordability.
-
-
#20 Reply
Posted by
Arkzilla
on 01 May, 2013 08:00
-
I have the pipe really like it but hate the silencer that came with it way to big. Wish i could find a q silencer to connect to it or something better.
-
-
#21 Reply
Posted by
Dirtzilla
on 01 May, 2013 09:00
-
I have the pipe really like it but hate the silencer that came with it way to big. Wish i could find a q silencer to connect to it or something better.
Maybe Matt Shearer could sell you just a silencer, u have the 3 inch silencer or sparky silencer
-
-
#22 Reply
Posted by
Arkzilla
on 02 May, 2013 10:02
-
I have the sparky its huge. Doesn't sound bad just don't like it.
-
-
-
Really anything you bolt on Either AAEN, Q V1 or V2 and the HPR19, yeah Ill plug the DCS-5, will be a warp drive jump over a FMF, Bills, CT, Trinity exhaust system, pick what you want for the performance you want and affordability.
yea thats what ive been reading, hoping its a good improvement over a PTR
-
-
#24 Reply
Posted by
Arkzilla
on 02 May, 2013 11:42
-
I would like to find a Q silencer to put on it if i can get it to fit.
-
