Yea I just did clutch in mine the case is tough to get off make sure you set you little gear in middle of case up again or your clutch won't grab I checked before I bolted it down also check the cable pull it in and out should move with easy after that make sure the ARM ( that cable connects to ) is lined up with mark on the case . CHECK. THE CABLE. I bought a dirtdigger clutch when all I needed was a 8 dollar cable your going to need a case gaskit as well .  I would call motosport or where ever to see if it come with bolts for the gear I'm 75 percent sure on the basket as well Thoses pics are examples you will get the same one regardless