+-

Author Topic: My First 88 LT500 Build  (Read 26696 times)

Offline GrkGuy

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2207
  • Gender: Male
  • Location: ohio
Re: My first 88 lt500 build
« on: January 27, 2013, 12:04:46 pm »
when you are ready to take clutch cover off you must remove kicker and the clutch shaft arm,
take out the set screw that holds it in place then you should be able to pull it up, it takes some love to get it out
sometimes. you might have to put a pair of vise grips on it and then tap it up so it comes out. there is a thrust
arm with teeth on it, you need to make sure you have it set to grab shaft when it goes back in, or it wont let in drop
all the way in.
take a pic of the a arms we can tell you what they are, good luck with the build, we are here to help you all the way.
its fun to help other guys spend there money. :)

cometic amf gaskets are top of the line.. and come highley recommended
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store