I ordered a double axle extended and there's a metal clip that goes on the inside the axle where the sprocket hub slides against seems like the diameter of the durable axle smaller than a diameter of the stock axle
Can you take a picture.The Durablue axle uses the clips the axle nuts jam aginst the clips and tight everything up.It should have 2 clips.One on brake side to hold the brake rotor hub on.Then the other one on the chain sprocket side.You install the push pull axle nut then side the clip into the grove and tighten the axle nut up .You hold the round side of the axle nut and tighten the axle bolt,and it expands and get tight on the clips and hols everthing together like the Hondas axles, I hope this help if you need any thing else with it let me know i have durablue myself,but im not using it anymore
The stock axle has one round clip the sprocket hub slide up against here is a pic of the stock axle .. the durablue it doesn't fit wright
dura blue has their own sprocket hub dont they? or is it the brake side hub? I'll look at mine later. Did you buy the axle new?
Yeah I bought the axle ... Just got off the phone with durablue and told me to to use the circlip ??
yes use the stock c clip. what doesn't fit, is it loose? might be distorted from repeated removal. order a new one from suzuki.
i have a durablue eliminator axle in my 500. it used the clip. and all the other stock hubs and hardware.
Just fits loosely on the new durablue Eliminator axle .. c clip goes on the sprocket hub side ?
c clip goes on the right side, brake side.
take a pair of pliers and try to compress the clip. crush it as to make the id smaller and be tight on the axle. the hub should keep it on.
just looked fast and didn't see a part number for that clip.