Alright I finally got to test it, but it was during the daytime so no pics just yet of it in operation.

Here's what I started with lol... I wanted it mounted low as possible



First fitment mock up, needed to enlarge the hole for the cables



Here's a fitment check





And the almost finished bracket & light. Still needs to be painted. The primer that's on there acted like it never dried that's why it looks so f*cked up. I wired the light to the wiring under the tank. There was a white and yellow power + wire with a female spade connector, hooked it up with the red wire off the light. The black wire off the light hooked into the black w/ white tracer= ground under the tank. Ultra simple.