5 to 4 bolt rear hub switch? any help

• 5 to 4 bolt rear hub switch? any help
  Posted by Everts5299 on 15 Jan, 2014 17:44
• I need some help finding a direct fit four bolt rear hub. I have an 88 LT250R (model j). Trying to get rod of the 5 bolt hub
• 
  
• #1 Reply
  Posted by Sirreed on 15 Jan, 2014 18:08
• Ill most likely be corrected but I read (someplace) that the Suzuk Lt400 hubs fit on the stock axle. If I am wrong I am sorry. 
• 
  
• #2 Reply
  Posted by Dezsled on 15 Jan, 2014 18:24
• Sir reed I believe you are correct for the Zilla. I'm not sure if there's a thread about this going now for the 250...
  
  The Zilla can also use LTR450 rear hubs and gain an extra .75" on each side.
• 
  
• #3 Reply
  Posted by Everts5299 on 15 Jan, 2014 18:36
• Do you know how many splines are on the 450s hub?
• 
  
• #4 Reply
  Posted by Dezsled on 15 Jan, 2014 19:14
• 26 spline
  
  Some lt250 used 24
• 
  
• #5 Reply
  Posted by LT250RWV on 15 Jan, 2014 19:57
• Banshee hubs will fit on 24 spline axle.
• 
  
• #6 Reply
  Posted by PCS on 15 Jan, 2014 20:31
• all 26 spline hubs will swap, lt250/500 ltr 450 and ltz400(kfx/dvx400.) if you have an 88, you likely have a 26 spline axle. el diablo, member here, is running tusk ltz400 alum hubs on his 250. the ltr hubs will widen the rear end over the ltz400 but both have the same honda pattern.
• 
  
• #7 Reply
  Posted by Dwilkins126 on 16 Jan, 2014 05:29
• I am using Z400 Hubs on my 90 with the stock tires & rims as well for a perfect fit.
•