+-

Author Topic: 1991 lt250r restomod build  (Read 3606 times)

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 92
  • Location: Central New Jersey
Re: 1991 lt250r restomod build
« on: August 12, 2018, 07:06:35 am »
So while the engine is away I ordered every bearing and bushing on the bike had my frame, a arms, etc powder coated by a local guy who did a good job and turnaround was only 5 days. I also ordered elka shocks through lonestar racing due to the fact I’m running their +2 + 1 a arms. I made very clear on the phone it was for a 91 and that 91-92 have a different rear shock and he said no problem. Well this was first week of may I didn’t hear a single word back until June. It was only suppose to be 2 weeks to build the shocks. Well they call back and say the front shocks are built but elka can’t make a rear shock they don’t have the parts to do so. So after all that time and they just tell me they can’t make the shock that I specially asked if they could make. Note this is not Elkas fault it is lonestar. I called elka direct which I should’ve done from the start they explain the fork on the bottom of the shock they don’t make anymore and the icing on the cake the fronts were never built. So lonestar said they will take 200 off the 1000 and I can have just the fronts or cancel the order.
91 lt250r fully restored and race ready

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store