+-
« previous next »
Pages: 1 [2]   Go Down

Author Topic: what types of clutch you guys use and what works the best  (Read 1065 times)

Offline

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: what types of clutch you guys use and what works the best
« Reply #25 on: August 25, 2013, 04:22:11 pm »
sorry i dont. i got all these springs for my clutch on my liger motor so i can tune the primary pressure and the lockup weight.
Logged

Offline

  • 1991 Lt250r
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1350
  • Gender: Male
  • Location: West Virginia
Re: what types of clutch you guys use and what works the best
« Reply #26 on: August 25, 2013, 07:43:13 pm »
Thanks Chris  good info on the other springs .
Logged
91 Lt250r Bartlett port and head mod v force 2 Hinson Clutch Basket Cool Head Scp Pipe and silencer ,KN air filter ,EBC clutch, Ohlins  Triple rate Shocks Redone by PEP Shocks,Stock Rear Shock Redone By Pep Shock,  DG nerf Bars , Lonestar axle 2+2,Lonestar Swingarm ,Douglas Red Label rims.

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 78
Re: what types of clutch you guys use and what works the best
« Reply #27 on: August 26, 2013, 01:26:05 pm »
what the advantages to tuning the spring weight? Heavier = more pressure? Stronger engagement?
Logged

Offline

  • De oppresso liber
  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1427
  • Gender: Male
  • I like too pee on electric fences
  • Location: Harbor Springs, MI
Re: what types of clutch you guys use and what works the best
« Reply #28 on: August 26, 2013, 04:28:18 pm »
Quote from: Crash_Lander on August 26, 2013, 01:26:05 pm
what the advantages to tuning the spring weight? Heavier = more pressure? Stronger engagement?
Basically the more power you make the more likely the clutch is going to slip. Stiffer springs will make it less likely to slip. The trade off is the stiffer the spring, the harder it is to pull in the clutch lever. Chris having 73 pound springs on his drag bike, he doesn't use the clutch that much. On a trail/dune bike I think the 73 pounders would wear your hand out in a short time of riding.
Logged
If brains were gasoline, you couldn't power a **** ant's go-cart 2 laps around a cheerio.

Offline

  • De oppresso liber
  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1427
  • Gender: Male
  • I like too pee on electric fences
  • Location: Harbor Springs, MI
Re: what types of clutch you guys use and what works the best
« Reply #29 on: August 26, 2013, 04:32:03 pm »
Also on a drag bike being able to adjust the springs will you adjust your power to the track surface. Some are very hard others are sandy.
Logged
If brains were gasoline, you couldn't power a **** ant's go-cart 2 laps around a cheerio.

Offline

  • 1991 Lt250r
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1350
  • Gender: Male
  • Location: West Virginia
Re: what types of clutch you guys use and what works the best
« Reply #30 on: August 26, 2013, 06:25:39 pm »
This should be a stickey some good info in this thread.
Logged
91 Lt250r Bartlett port and head mod v force 2 Hinson Clutch Basket Cool Head Scp Pipe and silencer ,KN air filter ,EBC clutch, Ohlins  Triple rate Shocks Redone by PEP Shocks,Stock Rear Shock Redone By Pep Shock,  DG nerf Bars , Lonestar axle 2+2,Lonestar Swingarm ,Douglas Red Label rims.

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 230
Re: what types of clutch you guys use and what works the best
« Reply #31 on: August 26, 2013, 06:32:25 pm »
I use Barnett hd banshee springs with ebc zilla clutch plates. It is a tight fit getting the springs in but they do fit. It is surprisingly easy to pull. I'm hard on clutches and often slip the clutch to get RPM's up when climbing a dune. So far they are holding but I probably am burning thru plates faster than normal dirt or mx riding. So far I'm happy.
Logged

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1287
  • Location: Ontario,Great White North
Re: what types of clutch you guys use and what works the best
« Reply #32 on: September 17, 2013, 03:29:03 pm »
Quote from: LT250RWV on August 24, 2013, 06:08:06 pm
the ebC clutch springs that were heavy duty in your dirt digger pack are a copy of 85 86 spring I compared them this evening when I took me ebc clutch out to put in the barnett at kevlar  dirt digger

How are you liking that Barnett clutch?
Logged
Can,t fix stupid.:)

Offline

  • 1991 Lt250r
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1350
  • Gender: Male
  • Location: West Virginia
Re: what types of clutch you guys use and what works the best
« Reply #33 on: September 17, 2013, 03:53:45 pm »
I really like it holds well.
Logged
91 Lt250r Bartlett port and head mod v force 2 Hinson Clutch Basket Cool Head Scp Pipe and silencer ,KN air filter ,EBC clutch, Ohlins  Triple rate Shocks Redone by PEP Shocks,Stock Rear Shock Redone By Pep Shock,  DG nerf Bars , Lonestar axle 2+2,Lonestar Swingarm ,Douglas Red Label rims.

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1287
  • Location: Ontario,Great White North
Re: what types of clutch you guys use and what works the best
« Reply #34 on: September 17, 2013, 05:15:09 pm »
Quote from: LT250RWV on September 17, 2013, 03:53:45 pm
I really like it holds well.

Ya,they are pretty sweet.Had them in every bike I,ve needed to upgrade/replace.The springs alone are a big upgrade.
Logged
Can,t fix stupid.:)

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 49
Re: what types of clutch you guys use and what works the best
« Reply #35 on: September 17, 2013, 06:39:34 pm »
I've got a quick question re: a Hinson basket:

Do these require any additional parts when installing?  Or, does the basket just replace the stock basket?

I ask because I have one I took out of a spare motor I have and will be putting it in my (now) running motor this weekend.  The stack of pieces I have with it from pulling out of the other motor seems to have a spare washer with it.  When looking at the exploded view in the manual (page 3-49 of the 88-92 manual) I've got two of the washers that go between the basket and the "Clutch Sleeve Hub"  It could just be a spare from another stock clutch I sold however, the weird thing is that the back of the "Clutch sleeve Hub" where the washer touches has a worn in mark of a 4 sided semi-star shaped thing.  I can't find a washer with these parts that looks like that, though and it's obviously not shown in the exploded view. 
Logged

Offline

  • How is holding onto all the 85 86 swingers???
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1188
  • Gender: Male
  • NEEDIN 85 86 SWINGARMS
  • Location: MO
Re: what types of clutch you guys use and what works the best
« Reply #36 on: October 10, 2013, 09:33:12 pm »
Will running a Toomey hd spring be any harder on a transmission than a stock, seeing as how it probably doesn't allow any slippage at all? Just curious if there is any relation between tranny life & clutch slippage.
Logged
1-1985 SUZUKI LT250R
1-2013 HONDA TRX450ER
Pages: 1 [2]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store