Author Topic: Iceracer here's the cylinder (Read 597 times)

CorrecCraftFanatic82 · « **on:** January 26, 2014, 08:57:34 pm »

The crack is very small, mite even be hard to see, it looks like a lightening bolt.

Stpltn250r · « **Reply #1 on:** January 26, 2014, 10:12:29 pm »

here you go

CorrecCraftFanatic82 · « **Reply #2 on:** January 26, 2014, 10:46:22 pm »

Thanks stpltn250, I was gunna use a black felt pen ....... But u did it better thanks man

LTman · « **Reply #3 on:** February 04, 2014, 04:32:25 am »

remove the paint then recheak it

Iceracer · « **Reply #4 on:** February 04, 2014, 09:37:30 am »

It's easily weldable if it's actually a crack. And don't use paint stripper or brake cleaners to remove the paint. It will cause a gas called phosgene that's very toxic when welding.
Problem is why did it crack sk mtbkngs not flat or all thE gasket was not removed.

CorrecCraftFanatic82 · « **Reply #5 on:** February 06, 2014, 09:30:34 am »

The cylinder was ported, the intake was ported , problly too much as my guess, it is ****, if I ride long enough u can see the dirt build up in that area.

News:

Author Topic: Iceracer here's the cylinder (Read 597 times)

CorrecCraftFanatic82

Iceracer here's the cylinder

Stpltn250r

Re: Iceracer here's the cylinder

CorrecCraftFanatic82

Re: Iceracer here's the cylinder

LTman

Re: Iceracer here's the cylinder

Iceracer

Re: Iceracer here's the cylinder

CorrecCraftFanatic82

Re: Iceracer here's the cylinder

Suzuki Quadracer HQ Store Zone