+-
« previous next »
Pages: [1]   Go Down

Author Topic: 91 lt250r jetting  (Read 647 times)

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 65
91 lt250r jetting
« on: October 23, 2013, 08:41:19 am »
ok so i have a 91 lt250r bored over 50 with a fmf powercore pipe what should the maine jet be ?also it has a 13t front and 40t back gear what is the top speed ? <1>
Logged
when in doubt braaaap it out

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 223
Re: 91 lt250r jetting
« Reply #1 on: October 23, 2013, 09:30:25 am »
What carb? Elevation? Ambient temp? Airbox setup? Those are the first few questions to get you pointed in the right direction.  Nobody will be able to give you an exact size.
Some of the 250 guys will chime in to tell you what ranges of jets and needle settings to start with. Then you just gotta experiment. Good luck
Logged

Offline

  • 1991 Lt250r
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1350
  • Gender: Male
  • Location: West Virginia
Re: 91 lt250r jetting
« Reply #2 on: October 23, 2013, 12:32:26 pm »
I ran a 195  main and 35 pilot jet with stock ports kn filter and .50 over boysen rad valve  and fmf setup. I live around 2000 feet and ride up to 4000 feet. Winter I ran a 205 or 210 main. Which it ran fine for me.
Logged
91 Lt250r Bartlett port and head mod v force 2 Hinson Clutch Basket Cool Head Scp Pipe and silencer ,KN air filter ,EBC clutch, Ohlins  Triple rate Shocks Redone by PEP Shocks,Stock Rear Shock Redone By Pep Shock,  DG nerf Bars , Lonestar axle 2+2,Lonestar Swingarm ,Douglas Red Label rims.
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store