+-

Author Topic: Looking for Crank, Balancer Drive & Driven Gear  (Read 2394 times)

Offline AZ-ZILLA

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 31
  • Gender: Male
  • Location: Arizona
    • The RIG
Looking for Crank, Balancer Drive & Driven Gear
« on: October 10, 2012, 08:31:44 am »
Well, I pulled down the engine to  put in the 4th gear change over for my 87.  Should be pretty basic R&R, right......
Well, of course it was not.
1st)
When I pulled the cylinder, the front hold down stud into the expansion chamber broke out of the case and came off with it.  Looks like it has been that way for a while.

2nd)
I know there was something going on when I pulled the left cover off and the balancer spun freely.  Not a good thing.  Strange, the last trip out, I didn't notice any exsessive vibration.


Well, when I opened up the clutch side: (pics of carnage below)
  -the nut on the crank was loose and just floating on the crank end.  To the point that all the treads had been polished off and the crank threads warn down.
  -The balancer nut had also backed off and was floating on the end of the shaft.
  - The Balancer drive and Driven gears are torn up.
  - And it was a bit tough to get the internal balancer off the shaft with the burs and Key all deformed.

So, now,  before I go out and order OEM parts, I am looking out to see if anyone has any of these parts available and are not needed.
Please let me know if any of you out there can help.
Thanks,
AZ

* Crank
* Crank end nut
* Balancer Drive and Driven gear
87 LT500
Q RX‘d top end
Q pipe
Lightened/welded large hub flywheel
V-2 reads
Barnett heavy duty clutch springs
Back cut trans gears
Welded frame gussets
Gold vein & Gloss Black powder coat with (90% clear coat)
Works Triple rate front shocks.
Trail Tech. Vapor computer

Share on Facebook Share on Twitter


Offline Rider414

  • Trade Count: (0)
  • Pro Member
  • ********
  • Posts: 984
  • Gender: Male
  • Location: Detroit, mi
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #1 on: October 10, 2012, 09:53:37 am »
Its always something isn't it?

If your going to play you're going to pay.......... :-X

Ain't ever seen it......but I have heard it.

Offline Twinzilla

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 225
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #2 on: October 10, 2012, 11:10:48 am »
I have a crank assembly and possibly the gears.  Let me check on those.

Offline Slowzilla87

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 67
  • Gender: Male
  • Location: Iowa
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #3 on: October 10, 2012, 12:49:11 pm »
Bummer, theirs a guy over on E2S that should have the gears if no one here has anything
86 GSXR 1100
87 LT500
88 Banshee
88 GSXR 1428
89 GSXR 7-11
90 GSXR 750
07 RMZ 250 A/F 2 STROKE!!!
08 RMZ 450

Offline AZ-ZILLA

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 31
  • Gender: Male
  • Location: Arizona
    • The RIG
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #4 on: October 10, 2012, 12:57:17 pm »
Twin,
That would be great if you do.  Thanks for looking.
If so, PM me with what you have and what you want for it.
Thanks,
Gery
87 LT500
Q RX‘d top end
Q pipe
Lightened/welded large hub flywheel
V-2 reads
Barnett heavy duty clutch springs
Back cut trans gears
Welded frame gussets
Gold vein & Gloss Black powder coat with (90% clear coat)
Works Triple rate front shocks.
Trail Tech. Vapor computer

Offline AZ-ZILLA

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 31
  • Gender: Male
  • Location: Arizona
    • The RIG
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #5 on: October 19, 2012, 06:18:28 pm »
Since there does not look to be a spot on the forum to recognize other members.
I just wanted to put it out there.

I got a package today, and Twinzilla came thru with some great parts exactly as described that will get my trans back up and running as good as new, at a very fair fee.

Great communication, Great parts, Great packaging, Fast shipping.  Who could ask for more???

Thank you Sir, I appreciate it.

AZ
87 LT500
Q RX‘d top end
Q pipe
Lightened/welded large hub flywheel
V-2 reads
Barnett heavy duty clutch springs
Back cut trans gears
Welded frame gussets
Gold vein & Gloss Black powder coat with (90% clear coat)
Works Triple rate front shocks.
Trail Tech. Vapor computer

Offline Mitch Keller

  • Mitch Keller
  • Trade Count: (0)
  • Administrator
  • Trail Blazer
  • *****
  • Posts: 799
  • Love The Smell Of 927 and Race Fuel In The Morning
  • Location: Riverside Ca
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #6 on: October 19, 2012, 06:23:06 pm »
Since there does not look to be a spot on the forum to recognize other members.
I just wanted to put it out there.

I got a package today, and Twinzilla came thru with some great parts exactly as described that will get my trans back up and running as good as new, at a very fair fee.

Great communication, Great parts, Great packaging, Fast shipping.  Who could ask for more???

Thank you Sir, I appreciate it.

AZ


OK I get it you guys want a Feed Back Section..........
F Mitch Keller

Offline Twinzilla

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 225
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #7 on: October 19, 2012, 06:52:52 pm »
Thanks AZ, nice doin business with you too....

Offline Rider414

  • Trade Count: (0)
  • Pro Member
  • ********
  • Posts: 984
  • Gender: Male
  • Location: Detroit, mi
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #8 on: October 19, 2012, 08:31:47 pm »
Brian's the best!!!
Ain't ever seen it......but I have heard it.

Offline Quadster

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 238
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #9 on: October 20, 2012, 05:07:14 pm »
I have 2 250 cases that are broke there, tried welding on one of them with no luck!(skilled welder could have done it!!)

  Have 2 250 cranks and a balancer shaft also that look the same!!! RED LOCTITE!!!

Offline SBLT500R

  • Trade Count: (0)
  • Store Admin / Classifieds / Services
  • Weekend Warrior
  • **
  • Posts: 215
Re: Looking for Crank, Balancer Drive & Driven Gear
« Reply #10 on: October 20, 2012, 05:38:31 pm »
hope you didn't use that gas aluminum rod?   ;D

what did you do it with?  looks like a mig weld, thats how my first aluminum weld looked with a mig setup.  never used it agian, got a tig machine.

Offline mccarl.k

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 1
I need one of the gear in the pic above...Crank balancer gear and nut.jpg
if anyone might know where one is please message me.
thanks

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store