Author Topic: Parting out 06 ltr 450 mx quad (Read 714 times)

MeanGreen · « **on:** November 22, 2013, 06:47:02 pm »

I am parting out a nice race bike. Prices are as fallows:
Black plastics $150
Rath nerf bars and heal guards $150
After market upper & lower a arms $250
Front shocks $150
Seat with new gripper cover $100
Front bumper $40
Rear grab bar $30
Beadlocks $475 SOLD
Front hubs,spindles,calipers and rotors $100 for both.
Rear swing arm,shock,axle,hubs,linkage, caliper,$300 for all.
COMPLETE engine,harness,fuel injection, starter,exhaust,Air box,k&n filter,case saver, power commander ........ asking $1300
Let me know if you need something that's not listed,let me know.

MeanGreen · « **Reply #1 on:** November 22, 2013, 06:49:50 pm »

FACTORY FX seat cover on seat

Buckeye513 · « **Reply #2 on:** November 22, 2013, 06:55:32 pm »

Mean do you still have the complete rolling chassis?

MeanGreen · « **Reply #3 on:** November 22, 2013, 07:00:48 pm »

Yes sir. Wheels and tires sold and that's it.

MeanGreen · « **Reply #4 on:** November 22, 2013, 07:05:54 pm »

Nerfs and heal guards

MeanGreen · « **Reply #5 on:** November 22, 2013, 07:07:54 pm »

Grab bar

Buckeye513 · « **Reply #6 on:** November 22, 2013, 07:09:34 pm »

How much for the complete roller with plastics and seat and all? I don't need the wheels and tires I'll buy new ones. Basically just need everything minus the motor electronics and filter setup and exhaust.

MeanGreen · « **Reply #7 on:** November 22, 2013, 07:20:24 pm »

$1200 for everything including nerfs, bumpers and all.

MeanGreen · « **Reply #8 on:** November 22, 2013, 07:22:15 pm »

It has an after market frame also.

Dezsled · « **Reply #9 on:** November 22, 2013, 07:31:55 pm »

Really... Interesting any pics of the frame

MeanGreen · « **Reply #10 on:** November 22, 2013, 07:41:48 pm »

This is from the side, looking at the radiator.

MPC014 · « **Reply #11 on:** November 22, 2013, 11:11:57 pm »

Just wondering if the 450 shocks will fit on a 87 500? if you could let me know thanks

MeanGreen · « **Reply #12 on:** November 23, 2013, 03:11:30 am »

I'm sure they would. I have 06 yfz 450 front shocks on my 89 Quadzilla. With the shock fully extended, it measures 17 1/8 inch from center to center on the bolt holes. The mounting ends are each 7/8" thick. The spring adjustment is near the center, so the shock could be made longer or shorter.

Sledhead · « **Reply #13 on:** November 23, 2013, 05:10:59 am »

Front master cylinder available?

Dangerouspower · « **Reply #14 on:** November 23, 2013, 06:49:13 am »

Derrick this is calling your name!..

Buckeye513 · « **Reply #15 on:** November 23, 2013, 07:03:13 am »

It is calling my name I'm working on securing funds. Anyone interested in my 88 LT500 roller?? Good news is Mean is only like an hour away from me.

Iceracer · « **Reply #16 on:** November 23, 2013, 01:57:59 pm »

That's a gussetted OEM frame.

PowerStrokin · « **Reply #17 on:** November 23, 2013, 02:50:34 pm »

Quote from: Iceracer on November 23, 2013, 01:57:59 pm

That's a gussetted OEM frame.

I would have to agree. The welding gives it away.

MeanGreen · « **Reply #18 on:** November 23, 2013, 04:24:20 pm »

I'm sorry guys, I did not mean to mislead anybody. I meant to withdraw that statement that I made. I went off what the guy told me. I messaged DEZSLED After he made his comment and spoke to him about it. it does appear that I was lied to.

Dezsled · « **Reply #19 on:** November 23, 2013, 05:19:19 pm »

No harm no foul...mean green

Carry on

Iceracer · « **Reply #20 on:** November 23, 2013, 05:40:15 pm »

Ya no problem.

Chuckie25 · « **Reply #21 on:** November 23, 2013, 06:03:50 pm »

Told y'all this was a good dude!

Buckeye513 · « **Reply #22 on:** November 23, 2013, 06:57:46 pm »

Hey chuckie I referred him to the site... Still waiting for my referral bonus... Mitch?!?!

MeanGreen · « **Reply #23 on:** November 23, 2013, 09:11:27 pm »

Thanks Chuckie! And don't worry Buckeye, if no Bonus comes, I'll atleast send you a Christmas card!

MeanGreen · « **Reply #24 on:** August 17, 2014, 06:54:56 am »

Update. Items still available.
All front suspension.
Factory front shocks. $150.
Front spindles, hubs, calipers etc. $125
After market A-arms. $150.
Seat with new cover. $100
Rear shock. $50.
Factory exhaust. $40
Radiator and electric fan. $60.
Rear grab bar. $30.

News:

Author Topic: Parting out 06 ltr 450 mx quad (Read 714 times)

Suzuki Quadracer HQ Store Zone