Hi everyone
Ive got a 88 Zilla with Paul Turner National porting, 39mm keihin carb and a PT power head.
Im looking for a better pipe I have a FMF on it now. Should I go with a PT pipe because it will match my port job or go with on of the big boys Aaen, Q, HPR
I do mostly Dune riding Thanks.
Go with a newer pipe, The PT is ok, but it's 20+ year old tech. The newer pipes are a big difference over the old pipes.
Depends....
A PT will probably match your porting and run decent but it'll cost you close to $400 for a new PT, if you can pick up a used PT for $225 or less I'd definitely do it.
If you gotta buy a new one and you want the best dune riding pipe I'd look at Jerry Hall, it's expensive but you won't be looking for more horsepower just after you paid a bunch of money for your new set up.......been there done that.
What dunes do you ride?
Thanks for the reply's
I ride mostly Oregon and Idaho dunes I do go to Glamis once and a while.
Depending on where you are you might be able to get Arlen of Led to build you a pipe as well.
I'm in BC Canada but go to Washington and Oregon often. I think ill probably go with a HPR #19 pipe. What's the best way to get a hold of Jerry Hall?
I'm in BC Canada but go to Washington and Oregon often. I think ill probably go with a HPR #19 pipe. What's the best way to get a hold of Jerry Hall?
Call him direct at (623) 931-8132
I'm in BC Canada but go to Washington and Oregon often. I think ill probably go with a HPR #19 pipe. What's the best way to get a hold of Jerry Hall?
Jerry is also on this site and posts often. His user is MotorGeek.
PT. 250 good . 500, always leaving you wwanting more.