Aaen/Q pipe silencer

• Aaen/Q pipe silencer
  Posted by Rainman56 on 31 Jul, 2013 07:55
• Just curious if the Aaen or Q pipe will work/fit with an FMF silencer for the LT500,s?
• 
  
• #1 Reply
  Posted by Dezsled on 31 Jul, 2013 08:01
• Pics of both v1 top v2 bottom
  
  
  
  
• 
  
• #2 Reply
  Posted by Rainman56 on 31 Jul, 2013 08:08
• I,ll have to take a close look at your pics.Basically I have a new FMF silencer and a PT pipe.Thinking about switching to one of the heavy hitter pipes.Wanting to know if I were to buy just an Aaen pipe/no silencer will it fit up to my FMF and if so does the FMF silencer "flow" enough to avoid burndown?
• 
  
• #3 Reply
  Posted by MotorGeek - Jerry Hall on 31 Jul, 2013 08:24
• Quote from: Rainman56 on 31 Jul, 2013 07:55

  Just curious if the Aaen or Q pipe will work/fit with an FMF silencer for the LT500,s?
  

  
  The FMF silencer will fit the OEM pipe and the Paul turner pipe but will not fit the Aaen, Q1, Q2, or HPR 19.  Each of these pipes have their own unique silencer.
  
  
• 
  
• #4 Reply
  Posted by Dezsled on 31 Jul, 2013 08:24
• The Aaen/v2 stinger inside diameter might be close enough to work w/ the fmf silencer.
  
  Pics were from the pipe dyno testing day two.
  
  iirc the hpr pipe had a larger i.d. stinger, and v1 & 2 silencers were not interchangeable.
  
  This probably doesn't help out much
• 
  
• #5 Reply
  Posted by Rainman56 on 31 Jul, 2013 08:28
• Ok,much appreciated guys.
• 
  
• #6 Reply
  Posted by Dirtzilla on 31 Jul, 2013 16:07
• Rainman, the inside diameter of the Aaen silencer is 1.38 to 1.39 inches or 35 to 35.50 mm
  i got a spare silencer here
•