ok im back at my quadracer 250 rebuild its been a rough couple months haven't had much time to ef with it but I got motor all put back together but some how I over looked that my jug must be off a 91? or whenever they change the exhaust port size what I nned to find out is what years have the same size carb boot so I can get one cause I have 2 quadracer carbs off 87s and 2 carb boots off 87s and a carb boot off a quadzilla cause its way to big for my carbs thanks
ive come to the conclusion I have no idea what im talking about haha so the 87 is the larger reed cage? and 88 is smaller? or do I have that backwards. either way I need a carb boot for the bigger one maybe a good carb too
87 was the big reed's 88-92 were the small reeds.
The 250 and 500 boots interchange, but the 500 is both bigger and at an angle compared to the 250
How many bolts are on top of the reed cage.
1= 87. There is a Total of 5
2 = 88+ has a total of 6 bolts.
The 87 is the large reed. If you need a small reed cage and manifold I have a OEM and a boyseen. The boyseen is Allamericans. You can get with him on a price if you want that one.
ok I need an 87 quadracer carb boot then cause the one I have is at an angle and wont fit my carb... its the bigger five bolt one
the 5 bolt is an 87 and the reed cage is larger. but the diameter of the area where the carb bolts to should be the same. is it a stock carb?
Ya but I have a 87. Quadzilla carb boot which I'm sure doesn't fit a stock quadracer carb
do you want to trade reed boots,
I would but the end of this carb boot is messed up like whoever had it before tried to make it fit some where it wasn't suppose too lol
Ill do a little digging this weekend I should have a 87 intake somewhere. I'm never gonna use it, pretty sure it will be cut for v force reeds though. maybe not could be left over from before I went to them.
Thanks! That would be helpful n what's some good ball joints to get
Not Quadboss, all balls or oem.