I need a step by step guide with pictures on cleaning the carb on my lt250.
Thanks
Thanks man!
I just want to take it apart and end up messing it up!
Hey go to youtube their might be a video on it so you could watch
Just youtube 2 stroke carb cleaning and il sure something will pop up. Also if your still nervous taking it apart you can take pictures as you go So you know where everything goes when you put it back together
Did you find anything in it.Also let me know whats happen when you try to start it form the other post i sent you as soon as you do it.I check the pretty often so you shouldnt have to wait to long.
Was out this morning tried to start it the way I was told!No go!Was almost like it was trying to start tho!
Have a good strong spark.I just took off the carb.Looks ok but Im not sure how to take it all apart to clean
Take the 4 screw out of the bottom then you take out the jets the brass pieces,One sticks out and the other needs a small flat head screw diver to take it out.Spray carb cleaner in their and soak it.The blow the jets carefully with a air compresser.Then blow out where the jets went in the carb,Then turn the carb over to the oval side going to the airbox and blow air threw the 3 little holes.Do this a few times to make sure its clean.Well then put jets back in and put the bowl on .Then put it back on the quad .Also you will have to take the little screw out of the top where the cable goes in the carb.To remove the slide should have said this step first.Hope this help you
I had it opened and I unscrewed the bottom and There was a screw holding a pice of round plastic,Took that off and I see a jet,Not sure if it screws out or not,I blow all the holes clean tho.where is the idle screw on these?
i think the jet is a 6mm, and yes it screws out, the other jet uses a very small screw driver
I didnt yet
no point lieing to you guys ive been drinking for the last week or so for news years!Only coming round to my self now!I had it apart but Wasnt sure where to start!Are you on facebook or any instant messaging services?I would like to talk one on one about it if that would be ok!?
Did you sober up and try it.il try to make a video on my youtube tomorrow of basic cleaning of the stock carb if i get the time or if it isnt to cold.So you can get riding your lt250r. I would check ebay for some replacement reeds for the 87.you can find boysen for cheap sometimes. Also if their stock it time to replace them anyways , you will get better performance from the new reeds which is always a gain.
Almost sober!I think last night might be my last for a while! ha ha
If you could make a video that would be fantastic!
Im going to order some reeds on Thursday!
Hopefully that should be the end of my problems!
thanks guys!