Removed My Reeds.

• Removed My Reeds.
  Posted by Ciaran on 06 Jan, 2013 08:06
• Removed them tody and they look almost new.But the boot has a rather large slice in it,
  What problems would that cause?
• 
  
• #1 Reply
  Posted by LT250RWV on 06 Jan, 2013 10:27
• Was your reeds laying flat against the cage.Also how was the black under them is it wore off is still their .Is their anyway you could upload pictures .So we can see.Is the slice all the way threw the boot.Would it leak air were its sliced..Im going to try to make video today of me cleaning my stock carb.So you can see the step.It is super easy and no way is hard as you think it would be.
  
• 
  
• #2 Reply
  Posted by Ciaran on 06 Jan, 2013 13:07
• Here are a few pics of the boot and reeds
• 
  
• #3 Reply
  Posted by Ciaran on 06 Jan, 2013 13:08
• 2
• 
  
• #4 Reply
  Posted by Ciaran on 06 Jan, 2013 13:09
• 3
• 
  
• #5 Reply
  Posted by LT250RWV on 06 Jan, 2013 13:18
• The reeds look fine to me.The boot is shot.You can force the carb in it farther .But its really hard to do alot of force pushing it in..You need a new boot. It would be so much easier for you. If its leaks it could blow it up from being lean.I say your crab is super dirty and the jets or air ways are pluged up.Im going to make a video later today of carb cleaning for you on my youtube .obdwv is my user name on youtube.
• 
  
• #6 Reply
  Posted by Ciaran on 06 Jan, 2013 13:22
• I will keep an eye out for the video!Could you explain what each jet does and what each screw does?
  Thanks for your help!
• 
  
• #7 Reply
  Posted by Ciaran on 06 Jan, 2013 13:25
• Doesnt seem to be a youtube channel called 'obdwv'??
• 
  
• #8 Reply
  Posted by LT250RWV on 07 Jan, 2013 14:16
• yea its my user name on youtube.odbwv .But a video that you can find my channel with would be. Lt 80 jumping around. Then look for odbwv  in the corner as the author .Im going to try to make it tonight for you.If i can get someone to hold the camera for me.
• 
  
• #9 Reply
  Posted by Ciaran on 07 Jan, 2013 14:50
• Would you mind adding me on facebook so we can talk?
• 
  
• #10 Reply
  Posted by LT250RWV on 07 Jan, 2013 19:21
• Yea what is your facebook name mine is Brian Shaffer
• 
  
• #11 Reply
  Posted by Ciaran on 08 Jan, 2013 05:46
• Add me! Ciaran Hartin
• 
  
• #12 Reply
  Posted by GrkGuy on 08 Jan, 2013 13:10
• that ripped boot will lean out your motor real fast, when you start it did it take off in a high rev.
  throw that boot away, do not try and use it again.
• 
  
• #13 Reply
  Posted by LT250RWV on 08 Jan, 2013 16:19
• Hey i sent you a request on facebook add me.I made a video and will post it to your facebook as soon as you add me to your facebook.Its a little dark but should help you out.I had a better one but lost the file before i could down load it.Just let me know soon as you add me so i can post it to you.Brian
• 
  
• #14 Reply
  Posted by Ciaran on 08 Jan, 2013 19:57
• Ordering a new one as soon as i get some spare cash!Just the wait from america is sickening!
• 
  
• #15 Reply
  Posted by Ciaran on 08 Jan, 2013 19:57
• You rock brian!
•