electrical help.

• electrical help.
  Posted by Meaness1983 on 22 Jul, 2014 14:23
• Not sure if this has been covered so im going to ask. I need to know how to check my stator,  coil, cdi box with a multimeter. Im trying to track down a issue by process of elimination. Its an 1985 lt250r.  Im not sure how to do this as far as procedure and what ohm readings I should be seeing. Any help will be greatly appreciated.
• 
  
• #1 Reply
  Posted by Deebo on 22 Jul, 2014 17:04
• If you can get a manual, all the specs are in there.
• 
  
• #2 Reply
  Posted by Meaness1983 on 23 Jul, 2014 03:36
• I don't have one and plan on selling the atv after I get it fixed. Dont really want to spend the extra money on it. I was hoping some of these guys could help me out.
• 
  
• #3 Reply
  Posted by Rainman56 on 23 Jul, 2014 10:15
• From Clymer manual
• 
  
• #4 Reply
  Posted by Meaness1983 on 23 Jul, 2014 16:43
• Realized I unplugged one of the coil wires while installing the exhaust. I feel like a dummy. Plugged her up run it through a few heat cycles , recheck bolts,  She's running pretty dang good. Thanks for all your help
•