Broken Power Valve Actuator

• #25 Reply
  Posted by Sdunlimited on 15 Sep, 2013 07:58
• Hey Guys - I just had a few mins to go a pull a compression number off this thing and the high number I got was ~153psi.  That's at WOT, 5 kicks.  It seemed to go up the harder I kicked. 
  
  Isn't that a little low?  Do you think it'll fire at this psi? 
  
  Thanks~
  
  
• 
  
• #26 Reply
  Posted by Chuckie25 on 15 Sep, 2013 08:15
• It should definitely run at 153psi. Is that a fresh bore, piston and rings?
• 
  
• #27 Reply
  Posted by Sdunlimited on 15 Sep, 2013 08:17
• Thanks - it's a 'recent' bore, piston & rings.  It's got some time on it but was running previously.  Running out now but will get some fuel in this pig this afternoon and see what happens
  
  
  
• 
  
• #28 Reply
  Posted by Sdunlimited on 15 Sep, 2013 13:55
• She Runs!!!
  
  But there's a few problems outlined here:  http://www.suzukiquadracerhq.com/lt250/88-lt250r-runs-but-not-well-multiple-problem-diagnosis/ 
  
  
• 
  
• #29 Reply
  Posted by Rider414 on 15 Sep, 2013 14:21
• The Quadracer gods were happy today!!! 
•