ok so the part that the oil bolt screws into is all striped out and i was woundering wha i can do to fix it can you use a tap and die set ?
If its stripped out running a tap through wont change anything. Unless you go to a bigger bolt. Gonna need to heli coil it!
try a 1/4 20 tap. that is a little bit bigger than the stock m6. sometimes it works sometimes it doesn't. would depend how stripped it is. or go bigger or heli coil it
not sure on the 250 but the zilla has to different bolts, short and long.
if you got some bad threads the longer one will work.