-
custom zilla part out
Posted by
OneShotKyle
on 18 Aug, 2013 10:30
-
first off is a full set of chromoly +3 forward stock width a-arm's with bushing's, s.s. bolt's, new ball joint's (rubber caps are cracking) qty 4 aluminum brake line clamp's and the spindles. arm's were powder coated ford blue. less than 10hrs on these tired of it sitting.
500.00 for all shipped.
-
-
-
next up is a set of aluminum tie rod's with hiem's
100.00 shipped
-
-
-
here is a set of one off JJandA 3 spoke hubs with wave rotors and aluminum bearing cap's(cap's were used when I got them and are scuffed on the ends. these are made up to use stock lt500 spindles/calipers and cut a lot of weight. can sell with 3 spoke wheels in picture for another 100.00
400.00 shipped
-
-
-
used billet aluminum lt500 pegs with all mounting hardware.
150.00 shipped
-
-
-
oem grab bar powder coated ford blue
85.00 shipped
-
-
-
excellent re upholstered by cascade inovations
150.00 shipped
-
-
-
all prices are o.b.o. and will take consideration to fair offer's. remember I have theses as shipped prices and some of the large thing's are expensive to ship. there is a lot more to get listed from this bike. complete 540hrd engine/6+ladder swingarm/oem racecut plastic's/Q pipe/48hv/drag stem/ lectron and more.
-
-
#7 Reply
Posted by
Motoman991
on 18 Aug, 2013 11:33
-
Where are you located? And would you consider selling just the bottom end of the motor?
-
-
-
central Oregon. not interested in splitting engine up. there is nothing that hasn't been done to engine. less than 10hrs on complete build.
-
-
#9 Reply
Posted by
Buckeye513
on 18 Aug, 2013 16:04
-
What kind of ladder swinger and what kind of carrier and how much?
-
-
#10 Reply
Posted by
Stpltn250r
on 18 Aug, 2013 17:05
-
i remember this build... used a metaltech and a 40mm carrier for banshee or jj&a
-
-
-
lectron and billet intake sold
a-arms and swingarm SPF
I am trying just to list parts in small lots so I don't get lost in all the pm's and shipping b.s.
more to come as things sell off......
-
-
#12 Reply
Posted by
LT250RWV
on 18 Aug, 2013 21:07
-
Hey do you have a stock 6 bolt reed boot and the boot that goes from the airbox to the carb.
-
-
#13 Reply
Posted by
Buckeye513
on 19 Aug, 2013 03:52
-
Ok let me know when you're selling the swinger and that radiator if its getting sold.
-
-
-
all pm's answered
-
-
-
a-arms and swingarm still available, buyer backed out
-
-
#16 Reply
Posted by
LT500Kid
on 21 Aug, 2013 04:39
-
Its a shame to see this bike parted out it was a beautiful machine! But they are worth more in pieces when everything is aftermarket.
-
-
#17 Reply
Posted by
LT250RWV
on 21 Aug, 2013 13:42
-
Do you have a 6 bolt stock boot. Thanks Brian
-
-
-
That seat is sweet. Just need a bike to put it on.
-
-
#19 Reply
Posted by
QuadMan8
on 21 Aug, 2013 15:17
-
What type of swing arm, how long, what carrier, price? any pics
-
-
-
i remember this build... used a metaltech and a 40mm carrier for banshee or jj&a
can't remember metaltech making a ladder swingarm? can you show me where you read that?
-
-
-
Do you have a 6 bolt stock boot. Thanks Brian
im guessing you mean intake? no
-
-
-
best pick I have of swingarm at this time. to busy to do much but work eat sleep.
plus 6 swingarm no link, will come with allthe front pivot bearings,seals and pivot bolt. black chain slider and chain guide also. 500 shipped
it's still up in the air who built this. this and one other drQ had built by who? just have never seen metaltech build a ladder style.
-
-
#23 Reply
Posted by
Buckeye513
on 21 Aug, 2013 18:52
-
Are the carrier and jj&a axle already gone? And excuse my stupidity but is that a banshee carrier?
-
-
-
Are the carrier and jj&a axle already gone? And excuse my stupidity but is that a banshee carrier?
axle and carrier going into another bike for my son. I only use Honda style carriers no matter what build.
-