Author Topic: custom zilla part out (Read 3049 times)

OneShotKyle · « **on:** August 18, 2013, 10:30:52 am »

first off is a full set of chromoly +3 forward stock width a-arm's with bushing's, s.s. bolt's, new ball joint's (rubber caps are cracking) qty 4 aluminum brake line clamp's and the spindles. arm's were powder coated ford blue. less than 10hrs on these tired of it sitting.
500.00 for all shipped.

OneShotKyle · « **Reply #1 on:** August 18, 2013, 10:35:11 am »

next up is a set of aluminum tie rod's with hiem's
100.00 shipped

OneShotKyle · « **Reply #2 on:** August 18, 2013, 10:38:16 am »

here is a set of one off JJandA 3 spoke hubs with wave rotors and aluminum bearing cap's(cap's were used when I got them and are scuffed on the ends. these are made up to use stock lt500 spindles/calipers and cut a lot of weight. can sell with 3 spoke wheels in picture for another 100.00
400.00 shipped

OneShotKyle · « **Reply #3 on:** August 18, 2013, 10:41:49 am »

used billet aluminum lt500 pegs with all mounting hardware.
150.00 shipped

OneShotKyle · « **Reply #4 on:** August 18, 2013, 10:46:23 am »

oem grab bar powder coated ford blue
85.00 shipped

OneShotKyle · « **Reply #5 on:** August 18, 2013, 10:47:49 am »

excellent re upholstered by cascade inovations
150.00 shipped

OneShotKyle · « **Reply #6 on:** August 18, 2013, 10:50:46 am »

all prices are o.b.o. and will take consideration to fair offer's. remember I have theses as shipped prices and some of the large thing's are expensive to ship. there is a lot more to get listed from this bike. complete 540hrd engine/6+ladder swingarm/oem racecut plastic's/Q pipe/48hv/drag stem/ lectron and more.

Motoman991 · « **Reply #7 on:** August 18, 2013, 11:33:07 am »

Where are you located? And would you consider selling just the bottom end of the motor?

OneShotKyle · « **Reply #8 on:** August 18, 2013, 11:43:57 am »

central Oregon. not interested in splitting engine up. there is nothing that hasn't been done to engine. less than 10hrs on complete build.

Buckeye513 · « **Reply #9 on:** August 18, 2013, 04:04:14 pm »

What kind of ladder swinger and what kind of carrier and how much?

Stpltn250r · « **Reply #10 on:** August 18, 2013, 05:05:29 pm »

i remember this build... used a metaltech and a 40mm carrier for banshee or jj&a

OneShotKyle · « **Reply #11 on:** August 18, 2013, 09:02:49 pm »

lectron and billet intake sold

a-arms and swingarm SPF

I am trying just to list parts in small lots so I don't get lost in all the pm's and shipping b.s.
more to come as things sell off......

LT250RWV · « **Reply #12 on:** August 18, 2013, 09:07:40 pm »

Hey do you have a stock 6 bolt reed boot and the boot that goes from the airbox to the carb.

Buckeye513 · « **Reply #13 on:** August 19, 2013, 03:52:33 am »

Ok let me know when you're selling the swinger and that radiator if its getting sold.

OneShotKyle · « **Reply #14 on:** August 20, 2013, 04:54:20 am »

all pm's answered

OneShotKyle · « **Reply #15 on:** August 20, 2013, 09:29:48 pm »

a-arms and swingarm still available, buyer backed out

LT500Kid · « **Reply #16 on:** August 21, 2013, 04:39:10 am »

Its a shame to see this bike parted out it was a beautiful machine! But they are worth more in pieces when everything is aftermarket.

LT250RWV · « **Reply #17 on:** August 21, 2013, 01:42:40 pm »

Do you have a 6 bolt stock boot. Thanks Brian

1986QuadRacer · « **Reply #18 on:** August 21, 2013, 02:31:39 pm »

That seat is sweet. Just need a bike to put it on.

QuadMan8 · « **Reply #19 on:** August 21, 2013, 03:17:58 pm »

What type of swing arm, how long, what carrier, price? any pics

OneShotKyle · « **Reply #20 on:** August 21, 2013, 06:38:27 pm »

Quote from: Stpltn250r on August 18, 2013, 05:05:29 pm

i remember this build... used a metaltech and a 40mm carrier for banshee or jj&a

can't remember metaltech making a ladder swingarm? can you show me where you read that?

OneShotKyle · « **Reply #21 on:** August 21, 2013, 06:39:38 pm »

Quote from: LT250RWV on August 21, 2013, 01:42:40 pm

Do you have a 6 bolt stock boot. Thanks Brian

im guessing you mean intake? no

OneShotKyle · « **Reply #22 on:** August 21, 2013, 06:50:05 pm »

best pick I have of swingarm at this time. to busy to do much but work eat sleep.

plus 6 swingarm no link, will come with allthe front pivot bearings,seals and pivot bolt. black chain slider and chain guide also. 500 shipped

it's still up in the air who built this. this and one other drQ had built by who? just have never seen metaltech build a ladder style.

Buckeye513 · « **Reply #23 on:** August 21, 2013, 06:52:59 pm »

Are the carrier and jj&a axle already gone? And excuse my stupidity but is that a banshee carrier?

OneShotKyle · « **Reply #24 on:** August 21, 2013, 07:01:40 pm »

Quote from: Buckeye513 on August 21, 2013, 06:52:59 pm

Are the carrier and jj&a axle already gone? And excuse my stupidity but is that a banshee carrier?

axle and carrier going into another bike for my son. I only use Honda style carriers no matter what build.

News:

Author Topic: custom zilla part out (Read 3049 times)

Suzuki Quadracer HQ Store Zone