44 Lectron & 45 lectron(alky)

44 Lectron & 45 lectron(alky)
Posted by Stpltn250r on 28 Jan, 2013 12:13
I have a 44 gas lectron with standard plastic bowl and 5-2xl needle. Gravity set up.

$150 shipped in the US by USPS with delivery confirmation

I have a 45 alky Lectron with cast dual inlet bowl with a dual in power jet and extra power jet and has a PE1 needle. Set up for a pump. (cast bowl was 200 by itself)

$300 shipped in the US by USPS with delivery confirmation

Will NOT take any less. They have been sitting for about two years. They can sit longer if need be or will try my luck on fleebay.

Both carbs were purchased from Packard. I put the one extra power jet and bigger bowl on the 45 alky carb.

I will get pictures up tonight.

#2 Reply
Posted by Stpltn250r on 29 Jan, 2013 08:01
Emails sent. I will send a pm in a minute.

I forgot that bowl has two outlets for powerjets. You could plug one with an overflow hose. I ordered this carb originally with a billet packard bowl and swapped it for one off my 48 which had the plastic bowl with the dual outlet powetjet fittings.

Here is the picture. Sorry for any inconvienence.