wont shift into neutral

• wont shift into neutral
  Posted by 87zillaman on 05 Jul, 2015 15:34
• ok so i dad a clutch problem was hanging up but now it wont go into neutral its all new and i have 85 or 86 lt250 springs in it and im running 10w40 castor motorcycle oil
• 
  
• #1 Reply
  Posted by Glamisrider on 05 Jul, 2015 21:02
• Quote from: 87zillaman on 05 Jul, 2015 15:34

  it wont go into neutral its all new
  

  
  When won't it go in to neutral?
  
  Running not running, etc?
  
• 
  
• #2 Reply
  Posted by 87zillaman on 06 Jul, 2015 15:43
• it goes in when im moving /running but when i stop it wont go in neutral
• 
  
• #3 Reply
  Posted by Zilla273 on 06 Jul, 2015 17:51
• u probably have clutch adjusted to tight, adjust cable to pull clutch lever further to disengage clutch more
• 
  
• #4 Reply
  Posted by Glamisrider on 07 Jul, 2015 14:25
• Quote from: 87zillaman on 06 Jul, 2015 15:43

  it goes in when im moving /running but when i stop it wont go in neutral
  

  
  When your stopped and motor is running (clutch pulled in) will it go in to neutral?
  
  If not, when your stopped and running (clutch in), if you shut off the motor clutch still in does it then go in to neutral?
  
  
• 
  
• #5 Reply
  Posted by 87zillaman on 07 Jul, 2015 17:31
• yes when its off with the clutch in it will go in neutral. and when its running it will not go in neutral.Im going to put the oem one back in and see if that makes a diff
• 
  
• #6 Reply
  Posted by Glamisrider on 07 Jul, 2015 18:46
• Your clutch basket & hub are not separating properly.
  
  Here's your fix:
  http://www.suzukiquadracerhq.com/engine-13/trans-trouble/msg41404/?topicseen#msg41404
  
  Read my previous post and click the link to the fiche so you understand what the issue is.
  
  .....and instead of using type F we're now using Maxmia MTL-R
• 
  
• #7 Reply
  Posted by 87zillaman on 07 Jul, 2015 18:59
• thanks man. do you think its the spring i put in. because last year it did not do this with old springs the i was running
•