I have a 89 Zilla I have a FMF and a Trinity Pipe .
I need to know the carbureter setting for the 89 with the FMF pipe
the motor is stock I think I have K&N and it has open air filter
I also need to know where the Trinity should be running at
and I have a 38mm PWK and a 40mm Lectron both not on yet the bike still has stock carb
thanks
Well what are you wanting to run? So we can help you out?
im building an 87 as well , so i was thinking with the smaller reed block on the 89 i would have more grunt or torque and the 87 has the biggger reed it would give me more topend..... am i on the right track ? so i wanna set the 89 up as more a woods machine and the 87 more a duner or am i mixed up here ? im running the stock carb for now on the 89 and i think im running the fmf and i need to know the jet specs with open lid k&n stock motor
On the 89 w/fmf, start about 430 and back it off till it revs out clean. Personally the stock Mikuni carb bored is a much better carb than keihin or lectron carbs.
i went with the trinity pipe on the zilla , called trinity and asked for jetting specs and they gave me fmf specs, so i need to know jetting spec for 89 with the trinity pipe k n filter and stock carb thank you