Billet Intake

• Billet Intake
  Posted by Rainman56 on 12 Aug, 2013 16:28
• Is anyone still making the billet intakes to run bigger carbs on the 500,s?
• 
  
• #1 Reply
  Posted by Dezsled on 12 Aug, 2013 17:10
• Could someone post a pic ...
• 
  
• #2 Reply
  Posted by Kyle T on 12 Aug, 2013 17:30
• What is the point of one of these anyway? I never knew...
• 
  
• #3 Reply
  Posted by Motoman991 on 12 Aug, 2013 17:57
• This shows the billet intake on my hybrid.
  
  
  
• 
  
• #4 Reply
  Posted by Kyle T on 12 Aug, 2013 18:07
• Very sexiful. But what does it do?
• 
  
• #5 Reply
  Posted by Buckeye513 on 12 Aug, 2013 18:09
• It fits larger carbs Kyle and it can change the location of your carb by having it done on a different angle. The look alone is worth it IMO though.
• 
  
• #6 Reply
  Posted by Kyle T on 12 Aug, 2013 18:09
• Ah.
  I lerned toodaye.
• 
  
• #7 Reply
  Posted by Buckeye513 on 12 Aug, 2013 18:12
• Like motoman is running a vm44 I'm not positive but I don't think the stock boot will fit it unless you bore out the rubber.
• 
  
• #8 Reply
  Posted by Dangerouspower on 12 Aug, 2013 18:31
• Im not sure but I imagine sblt does or would.
• 
  
• #9 Reply
  Posted by Rainman56 on 12 Aug, 2013 18:36
• sblt doesn,t list one but like you said I,m sure he could.Picked up a 44mm Lectron from badmoon I,ll eventually be putting on the 500 once I get finally put together so I,ll be in the market for one.Guess I could try posting in the wanted section?
• 
  
• #10 Reply
  Posted by Kyle T on 12 Aug, 2013 18:38
• Didn't Trinity used to blab about having a manifold for 44s?
• 
  
• #11 Reply
  Posted by Rainman56 on 12 Aug, 2013 18:43
• Quote from: Buckeye513 on 12 Aug, 2013 18:12

  Like motoman is running a vm44 I'm not positive but I don't think the stock boot will fit it unless you bore out the rubber.
  

  
  Still don,t see it fitting and even if you could find a way to cram it in ya just know its gonna crack.
• 
  
• #12 Reply
  Posted by Nopick on 12 Aug, 2013 19:05
• Mike Steiner builds them.  500 Fanatic on here but he doesn't visit the forum very often.
  
  http://www.suzukiquadracerhq.com/engine-builders/500fanatic-full-tilt-muscle-cars/
  
  Here are some pics.
  
  
  
  
  
  
  
  
  
  
• 
  
• #13 Reply
  Posted by OneShotKyle on 12 Aug, 2013 19:43
• im gonna start partying out my zilla and have one of fanatics billet intakes for an 87 cylinder angled for a large carb. I have a 48hv lectron hangin off it right now. will begin the part out and disassembly this weekend I think. pm me if your interested
  
  
  kyle
• 
  
• #14 Reply
  Posted by Rainman56 on 12 Aug, 2013 19:54
• Thanks for the offer but I need one to fit the smaller 6 bolt 88+ cylinder.
• 
  
• #15 Reply
  Posted by Buckeye513 on 12 Aug, 2013 19:59
• I want one for my 88 cylinder cause I eventually wanna have my 41.5 mikuni for trails and swap to a 50+ lectron for drags.
• 
  
• #16 Reply
  Posted by Rainman56 on 12 Aug, 2013 20:01
• Quote from: Nopick on 12 Aug, 2013 19:05

  Mike Steiner builds them.  500 Fanatic on here but he doesn't visit the forum very often.
  
  http://www.suzukiquadracerhq.com/engine-builders/500fanatic-full-tilt-muscle-cars/
  
  Here are some pics.
  
  
  
  
  
  
  
  
  
  
  

  
  
  Thanks for the link/info.Appreciate it.I,ll let ya know what I find out.
• 
  
• #17 Reply
  Posted by Stpltn250r on 12 Aug, 2013 20:33
• 500fanatic builds bigger intakes to. this one is for the liger. arctic cat intake to 54mm carb
• 
  
• #18 Reply
  Posted by Rainman56 on 13 Aug, 2013 11:44
• Ordered my billet intake today.Great guy to deal with.
• 
  
• #19 Reply
  Posted by Buckeye513 on 13 Aug, 2013 13:51
• Quote from: Rainman56 on 13 Aug, 2013 11:44

  Ordered my billet intake today.Great guy to deal with.
  

  
  How much?
• 
  
• #20 Reply
  Posted by 13.robb on 20 Oct, 2013 17:50
• Can you pm me his contact info, i am in need of an intake for an 87 250 cyl to fit a 38mm. Thanks. Robb
  
  
  
• 
  
• #21 Reply
  Posted by Zilla273 on 20 Oct, 2013 18:24
• x2 on that contact info, I really want one to run the vm44
• 
  
• #22 Reply
  Posted by Rainman56 on 20 Oct, 2013 19:20
• Contact info
  
  http://api.viglink.com/api/click?format=go&key=c7a018f99a67aaac33a35421e795cdf3&loc=http%3A%2F%2Fwww.suzukiquadracerhq.com%2Fengine-builders%2F500fanatic-full-tilt-muscle-cars%2F&v=1&libId=45df8349-501b-4ab8-8ae8-52c988c8a958&out=http%3A%2F%2Ffulltiltmusclecars.com%2F&ref=http%3A%2F%2Fwww.suzukiquadracerhq.com%2Fengine-13%2Fbillet-intake%2Fmsg29201%2F%3Ftopicseen&title=500Fanatic%20%2F%20Full%20Tilt%20Muscle%20cars&txt=http%3A%2F%2Ffulltiltmusclecars.com%2F&jsonp=vglnk_jsonp_13823219677448
  
  Mike is the guys name.
• 
  
• #23 Reply
  Posted by Rainman56 on 20 Oct, 2013 19:25
• Quote from: 13.robb on 20 Oct, 2013 17:50

  Can you pm me his contact info, i am in need of an intake for an 87 250 cyl to fit a 38mm. Thanks. Robb
  
  
  
  

  
  A 38mm will fit in the stock boot.I run a 38mm lectron and it will fit in the stock boot with a little persuasion.I also have a new boot off a RM500/465 that bolts up to a bigger carb.Think its a tad big on a 38 but I,ll check.Would be cheaper than a billet one.
  
  
• 
  
• #24 Reply
  Posted by 13.robb on 20 Oct, 2013 22:27
• Thanks Rainman, Yup caught between a decision of a new oem intake for $78, or get a custom one. Buuuuut since you mentioned it, tell me a lil more about the rm465/500 boot. I am running a 38mm pwk.   
  
•