Adjusting powervalve

• Adjusting powervalve
  Posted by Petenorth on 17 Nov, 2012 16:30
• How do you adjust the powervalve correctly? Once you put the cylinder on, hook the rod up. Start from there please. Thanks
• 
  
• #1 Reply
  Posted by Dezsled on 17 Nov, 2012 16:45
• Yeah ...preloading the spring ? Double oring the chingas...?
• 
  
• #2 Reply
  Posted by Dust360 on 17 Nov, 2012 16:51
• turn the spring counter clockwise 1 turn after pulling cover off and it is sitting in non-running position
• 
  
• #3 Reply
  Posted by Reddog815 on 17 Nov, 2012 16:56
• I snapped the page in the manual.
• 
  
• #4 Reply
  Posted by Petenorth on 17 Nov, 2012 17:18
• Thanks for the info. Do you you do anything on the side with the window other than hook the rod up?
• 
  
• #5 Reply
  Posted by Mitch Keller on 17 Nov, 2012 18:07
• Heck I cant remember was it to tighten the spring Clockwise or Counter Clockwise?
• 
  
• #6 Reply
  Posted by WestTexasKing on 17 Nov, 2012 18:37
• Nope, just hook the rod up to the powervalve and install the window.
  From there, index the cap to the spring with the powervalve in the open position, turn it 1-2 turns CCW depending on your pipe.
  Search the forum for my post on how to fine tune the powervalve to your engine and pipe.
•