300ft times

• 300ft times
  Posted by Zilla273 on 03 Jul, 2013 22:56
• so im gona do some sand drags at a local atv track in acpl months, any takers on what my times will be??? hpr top end on paper is 75-79hp, the track is straight sand, will have 9 paddle haulers, will be tryn several gear combos. 6inch swing arm, what should I be able to achieve for time
• 
  
• #1 Reply
  Posted by Zilla273 on 03 Jul, 2013 23:05
• fastest bike last yr I seen personally was a 450r with bla bla bla done, stock chassis with longer swinger was 5.00 im curious if I can beat it, Ik I would in the long run
• 
  
• #2 Reply
  Posted by Cunningham_821 on 04 Jul, 2013 08:43
• Hard to tell i got 4.5 out of my bike before the tranny started making all kinda noise and i packed it in. I was using 12 extremes i think but i also have a bar.
• 
  
• #3 Reply
  Posted by Cunningham_821 on 04 Jul, 2013 08:46
• To answer your ? yea you should be able to run under 5's imo. i normally run 500ft one thing i noticed in 300 is gearing is the biggest factor.
• 
  
• #4 Reply
  Posted by Zilla273 on 04 Jul, 2013 10:09
• nice, 4.5 is vary good, im gona shoot for 4.9 to 5.1s just so im not to disappointed lol .
• 
  
• #5 Reply
  Posted by MotorGeek - Jerry Hall on 04 Jul, 2013 10:16
• Quote from: Cunningham_821 on 04 Jul, 2013 08:46

  To answer your ? yea you should be able to run under 5's imo. i normally run 500ft one thing i noticed in 300 is gearing is the biggest factor.
  

  
  Chassis set up, tires, gearing........everything becomes more critical when the track is shortened.
• 
  
• #6 Reply
  Posted by Buckeye513 on 04 Jul, 2013 14:46
• Cunningham what gearing do you run for 300ft?
•