Run 46 is from a few years ago and the other is the new one.
The old set up is as follows; Dr Q/Shearer exhaust. Port work. cut stock head. boyseen rad valve. stock 38mm carb.
New set up is as follows; Dr Q/Shearer exhaust. slightly different port work. vm44 carb. vforce 3, cool head with some dome. This run was also with a different cylinder. Bosses are welded and the cylinder was resleeved to stock bore.
Nothing compares to the low/mid range power of a large displacement, single cylinder two stroke. I've rode this thing around for like 10 minutes on pavement. It's a monster.
Motorman where'd you dyno your bike at? Wanting to get a graph on mine once my build is finished.
At a friend's house in Rochester, Mi. I can give you his number if you want to give him a call.
Nah that's cool I thought maybe it was somewhere local to cincy.
Motoman I'd like to get his # I'm 20 minutes from Rochester. Did he have a shop on van dyke ave? I may have met h before but that Atv shop with the dump shut down
What a beast you got there!! Damn!!
Nice. What fuel and dome?
It's a custom dome machined from a blank using 93 octane.
That's a very nice performing engine package
Nobody in Cincinnati has an atv/cart dyno. What a rip off!
I've never been able to find one around Cincinnati. You will be driving a little if you want to dyno.
There are a few in pa i have one local wont take my bike there because he is my biggest competiton at the track.
there a few in ohio, mansfield has 2 and columbus, just google it and you will find them.
Thats impressive for 93 octane. Have you tested race gas to see if it will make more power?
We also made a few runs using 93 mixed with race fuel. I forget what octane the race fuel was. 93 octane made the most power, even though the differences were minimal.
I wish I didn't have to spend $15 a gallon for race fuel. Have you checked the crown for evidence of deto?
I put on about 2-3 hours of run time on this engine so far. I have it apart right now because it kept popping out of second gear. I have inspected the dome. I will check it tonight. The dome should be clean. The dome was matched to the piston.