Bump Steer?

• Bump Steer?
  Posted by Andys92 on 19 Oct, 2012 05:27
• Any chance of someone posting up a pic of a before and after bump steer mod.
  Thanks
• 
  
• #1 Reply
  Posted by Heminutt on 19 Oct, 2012 07:37
• for a 500 or 250
• 
  
• #2 Reply
  Posted by LT250RKID on 19 Oct, 2012 07:52
• Hemi nut it would be good if you could post it for the 250 bcuz that is something id like to see too
• 
  
• #3 Reply
  Posted by Heminutt on 19 Oct, 2012 08:32
• this is on the left side when you are sitting on it. the first pic is befor. you take the arm from the left side and put it on the right.
• 
  
• #4 Reply
  Posted by Andys92 on 19 Oct, 2012 08:39
• it was for a 250 . thanks for posting pictures ,appreciate it .
• 
  
• #5 Reply
  Posted by Heminutt on 19 Oct, 2012 08:42
• no problem
• 
  
• #6 Reply
  Posted by Qracer250alllday on 25 Feb, 2013 20:54
• So you just flip the tab upside down?
• 
  
• #7 Reply
  Posted by BadMoonRacing500 on 25 Feb, 2013 20:56
• Quote from: Qracer250alllday on 25 Feb, 2013 20:54

  So you just flip the tab upside down?
  

  Flip them over left side to right side etc.
• 
  
• #8 Reply
  Posted by Qracer250alllday on 25 Feb, 2013 20:59
• Ok just switch the left with right
• 
  
• #9 Reply
  Posted by BadMoonRacing500 on 25 Feb, 2013 21:16
• yup, instead of kicked up there kicked down. before you swap it look at how the tie rod lines up with the upper a arm. Do the swap and look again. With the mod it's lined up almost parallel with the upper a arm. it will smooth the steering out, it will still have some bump to it, but a lot smoother. You also should do the camber mod, it is huge in improving stock a arm handling on 250's and 500's.
• 
  
• #10 Reply
  Posted by Qracer250alllday on 25 Feb, 2013 21:28
• Nice when I get my new frame and arms I'm gonna do it...let the cousin ride it and he put it into a tree bent the upper left arm into the shock and tweaked the frame bad
•