Looks real good man!!! When my funds come back up I'll be down for one.
Looks dang good! Gonna have different color options ?
Yes, will do the color thing if you guys want.
I do need help to find if this part will cross to the other 250's and possibly the 500's. I only have the 87 lt250 to work off of.
Would you like some measurments, or pictures of my stock 85 frame? Anything i can do to help just let me know.
85-90 will all be the same. I think master cylinder mounts will be the same for 91-92 too but I gotta check.
Yes, pls let me know on the 91-91 bikes Dangerouspower.
Here is a pic of 91 hope this helps you guys
rear brake is missing the pin for the master push rod
yea I dont run it. Lost it sometime ago. Works fine without it believe or not.
ok. Here is the first rear master cyl gaurd installed. I have used a "sleeve bushing" that attatches to the rear of the gaurd, it passes thru the carbon fiber plate allowing you to clamp against the bushing vs the actual clear coating of the carbon fiber part. I will supply the bushings along with the stainless allen bolts. Due to the dimensions of this part a smaller head bolt must be used for clearance. This is the first one and its mine all mine!!!!!!
I plan on building a handful of these and then releasing them. (do i need to start a separate thread on this?)
LT250RWV: I need the demensions from hole center to hole center if you have a chance.
Rob I believe it same as the others but will check