Cleaning a arm components

• Cleaning a arm components
  Posted by Buckeye513 on 20 Apr, 2013 06:21
• So all my dust caps, washers, spacers and bolts are in good shape just need new bearings and seals. Any suggestion on cleaning the stock components I'm re using? Chemicals to use or should I just drop them off at a machine shop for a sonic bath?
• 
  
• #1 Reply
  Posted by Dezsled on 20 Apr, 2013 07:56
• Hell I'm lazy .. I spray the parts with contact cleaner an wipe them off, inspecting the condition as I go...
• 
  
• #2 Reply
  Posted by RustBelt on 20 Apr, 2013 08:10
• spray with de greaser and hose them off. Check the welds. New bearings should come with dust caps and hardware.
• 
  
• #3 Reply
  Posted by Buckeye513 on 20 Apr, 2013 11:17
• Rustbelt new kits that include everything are about $100 more than just bearings and seals and why replace pieces that are still in good condition if you don't need to.
• 
  
• #4 Reply
  Posted by RustBelt on 20 Apr, 2013 14:33
• Wow. That seems a little steep. I would just get the bearings in that case.
• 
  
• #5 Reply
  Posted by BadMoonRacing500 on 20 Apr, 2013 14:42
• Get a case tumbler for rifle brass and the cleaning polishing media, about an hour all polished and new.
•