Bumpers and foot pegs

• Bumpers and foot pegs
  Posted by Canada on 28 Aug, 2016 12:51
• First off this is a great forum 
   
  Do you guys know if any other modern front bumpers are close to fitting on the quadzilla's?
  
  Also the foot pegs I am looking for som lower and further back set pegs, I here maybe the rapter pegs are close?
  
  Also any other parts thet fit on these zilla's that would be sweet
  
  Thanks
• 
  
• #1 Reply
  Posted by cworobec on 29 Aug, 2016 06:46
• I've got a few sets of ims pegs that have been modded to fit the zills.
• 
  
• #2 Reply
  Posted by El Diablo on 29 Aug, 2016 20:28
• Quote from: Canada on 28 Aug, 2016 12:51

  First off this is a great forum 
   
  Do you guys know if any other modern front bumpers are close to fitting on the quadzilla's?
  
  Also the foot pegs I am looking for som lower and further back set pegs, I here maybe the rapter pegs are close?
  

  
  Duncan Racing makes a pretty good looking front bumper.
  
  As far as pegs go, I separated the foot peg part from the frame mount part and welded on Raptor pegs 1" lower & 1/2" further back. Really feels like a better setup than stock.
• 
  
• #3 Reply
  Posted by Canada on 04 Sep, 2016 17:41
• Just a qestion I just spent some time working on my Zilla, repainting some small things like the kick starter...
  
  When I was doing this I noticed if lower the peg's the kicker might not clear. When kicking over my moto boot currently goes under the peg? I did the same mod on my trx250r and like it alot but on the 250r the kicker goes forward so no big deal.
  
   I just want to make sure it will still have a long enough stroke to get this beast started 
• 
  
• #4 Reply
  Posted by El Diablo on 04 Sep, 2016 21:26
• It didn't have any effect on my kicker travel. The part that bolts to the frame never changed, only the foot rest part
• 
  
• #5 Reply
  Posted by PCS on 29 Aug, 2019 17:34
• raptor 660 pegs are really close. el diablo: are those yfz pegs?
•