what brake lever fits the zilla?
The factory bars are 7/8" I'd assume any hydraulic brake lever with that size perch mount would work as long as the line is long enough to reach the front master cylinder.
Alot of us just changed the front master to a Z400 and use the ASV levers.
Thats what i was thinking. I wasnt sure if one would just bolt in or not
Just be sure to get the right Banjo Bolt, not the same as the LT500, think the Z400 is a 10mm x 125 pitch, learned this the hard way
honda trx and suzuki ltr brake parts swap as well they are both nissin but like mitch said watch out for the bolt sizes. i just swapped a trx 450r front master to a lt250r and my yamaha tri z runs a suzuki ltr450 front master cylinder. some motorcycles that do not use radial master cylinders up front will also fit since many are for a 7/8" bar
Z400 upgrade works awesome! 10 x better than Suzuki stock. Simple mod and worth every penny. Just gotta change banjo bolt. You will be able to do stoppies !!
I think im gonna do the z400 master cylinder. i thought i could just find a lever that would work with the zilla master cylinder
I changed out to the RM250 front master, stops way better than stock.
I have a Kawasaki Mojave master brake cylinder on mine.work with no problems.I just used the banjo that was with the Mojave master cylinder.
The Mojave calipers are a direct swap on the 250 also. They're a bit better than the LT calipers.