Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: BadMoonRacing500 on April 18, 2013, 04:12:17 pm

Title: Re: Extended swinger and a-arm poll
Post by: PCS on July 23, 2013, 08:21:34 pm: Quote from: Q2W on June 26, 2013, 02:43:52 pm
Quote from: Rider414 on June 26, 2013, 02:34:24 pm
Zilla Swinger for the Hot Rods - these things are already wide enough no need for A-Arms.

Not if you want to do a long travel setup. :)
+k2 i also agree
Title: Re: Extended swinger and a-arm poll
Post by: Q2W on June 26, 2013, 02:43:52 pm: Quote from: Rider414 on June 26, 2013, 02:34:24 pm
Zilla Swinger for the Hot Rods - these things are already wide enough no need for A-Arms.

Not if you want to do a long travel setup. :)
Title: Re: Extended swinger and a-arm poll
Post by: Rider414 on June 26, 2013, 02:34:24 pm: Zilla Swinger for the Hot Rods - these things are already wide enough no need for A-Arms.
Title: Re: Extended swinger and a-arm poll
Post by: RustBelt on April 20, 2013, 10:42:25 am: Quote from: WestTexasKing on April 19, 2013, 04:34:48 pm
Yeah doofy, click view results.
LMAO. How bout that, it works. Thanks Tex.
Title: Re: Extended swinger and a-arm poll
Post by: BadMoonRacing500 on April 20, 2013, 10:40:29 am: Yes, brian they will come with longer tie-rods.
Title: Re: Extended swinger and a-arm poll
Post by: El Diablo on April 20, 2013, 01:30:36 am: One last question. Will the A-arms come with extended tie rods or can they be made available?
Title: Re: Extended swinger and a-arm poll
Post by: QuadMan8 on April 19, 2013, 08:41:00 pm: Badmoon--oops I skued your results and voted for 88 Lt500 but after vote read time frame--I am not within the 6 month window you stated for purchase.
Title: Re: Extended swinger and a-arm poll
Post by: BadMoonRacing500 on April 19, 2013, 05:33:20 pm: Yes raw, I asked about a local powder coater or plater so that could be an option. Haven't heard back from him about it. they will most likely be 4130 chromoly.
Title: Re: Extended swinger and a-arm poll
Post by: Buckeye513 on April 19, 2013, 05:02:17 pm: That pricing is raw I'm assuming no plating or powder coating correct? Are these going to be steel or aluminum components? Because I'm dumb enough to ask.
Title: Re: Extended swinger and a-arm poll
Post by: WestTexasKing on April 19, 2013, 04:34:48 pm: Yeah doofy, click view results.
Title: Re: Extended swinger and a-arm poll
Post by: RustBelt on April 19, 2013, 03:30:45 pm: Is there a way to see poll results with out voting? Im nosey.
Title: Re: Extended swinger and a-arm poll
Post by: BadMoonRacing500 on April 19, 2013, 12:12:18 pm: Roughly $400 or less for a swinger and $450 or less for the a-arms not sure on exact prices yet.
Title: Re: Extended swinger and a-arm poll
Post by: El Diablo on April 19, 2013, 10:28:23 am: You might want to sticky this thread for the meantime just to keep it at the top of the page for now. Also, is there any rough estimates on any pricing yet?
Title: Re: Extended swinger and a-arm poll
Post by: Dezsled on April 18, 2013, 04:54:20 pm: Oops... I didn't get to read the one part here it says to not vote if your not ordering in the next 6 months.

Disregard my vote D?
Title: Extended swinger and a-arm poll
Post by: BadMoonRacing500 on April 18, 2013, 04:12:17 pm: Ok guys as you know I'm working with Shawn at Proformance Prototypes in MI for swingers and a-arms http://www.suzukiquadracerhq.com/general-discussion/proformance-prototypes-swingers-and-a-arms/ I'm setting a poll up to see what everybody needs. I have sent a 87-90 250 swinger, he's making me a +2 ladder bar swinger and a set of 87-92 250 a-arms, will be made 2+1 with trx250r threaded upper ball joints to adjust camber. I will be sending my 88-90 zillas a-arms and 87-90 zillas swinger for templates as well. Just looking to see what you guys want, and if you have the odd parts 91-92 250-swinger,87 zilla A's and 85-86 250 A's and swingers to send to make jigs. Parts will be returned. If your not going to order these parts in the next 6 months please don't vote.