Jetting change or bad reeds?

• #25 Reply
  Posted by MotorGeek - Jerry Hall on 18 Jun, 2014 21:12
• Quote from: Deebo on 18 Jun, 2014 20:52

  Quote from: MotorGeek on 18 Jun, 2014 16:58

  
  Are  you running a spark arrestor type of muffler?  If so remove the screen and make a pass down the street.
  
  Are you running the air box lid?  If so remove it and make a pass down the street.
  
  If you are not running the air box lid, remove the air filter element and make a pass down the street.
  
  

  
  Currently setup with the Aaen pipe, no spark arrestor, and no air box lid.  Foam filter with an outer wear. 
  
  Pull the filter and make a pass? Sounds interesting..
  
   
  
  
  

  
  I have not had good results using an outer ware on the outside of a foam filter.  The filter oil gets on the outer ware and then the outer ware acts like a plastic bag over the outside of the foam filter. 
  
  Remove the outer ware and make a pass down the street.
  
  
  Have you changed filter oils or possibly over oiled the foam filter?
•