Author Topic: Checking Interest on Camber Slip On Spacers (Read 1281 times)

Mitch Keller · « **on:** March 02, 2013, 07:56:02 pm »

Just received some quotes on making some #7075 Aluminum Spacers for the lower OEM A Arm Camber Mode, these spacers will be notched at each end to match OEM ball joint and OEM a arm fit, simply unbolt your lower a arm and push the lower joint out and slip on the new camber spacer and tighten ....done.
looking at $30 bucks a set shipped

Dezsled · « **Reply #1 on:** March 02, 2013, 08:00:36 pm »

Now you fab some of them up. After bought the new a arms

Mitch Keller · « **Reply #2 on:** March 02, 2013, 08:03:10 pm »

Just seen a large interest in folks doing the camber mod, figured I would make it easy.

Rider414 · « **Reply #3 on:** March 02, 2013, 08:25:36 pm »

I want to do this. I do not want to cut my OEM a-arms. Im in for some if you make them.

Gillio · « **Reply #4 on:** March 02, 2013, 08:35:45 pm »

Will they come with the longer bolts?

BadMoonRacing500 · « **Reply #5 on:** March 02, 2013, 08:47:39 pm »

Yes please.

LT250RWV · « **Reply #6 on:** March 02, 2013, 08:55:04 pm »

I would be in for some!!

Heminutt · « **Reply #7 on:** March 02, 2013, 09:37:52 pm »

i would be in for a set

FX4Pitrone · « **Reply #8 on:** March 02, 2013, 09:42:52 pm »

Yup, Mitch I'm in!! Will the stock bolt work?

Deebo · « **Reply #9 on:** March 02, 2013, 10:45:18 pm »

X1........

Rainman56 · « **Reply #10 on:** March 02, 2013, 11:36:23 pm »

I,m in as well.

Zillicious · « **Reply #11 on:** March 03, 2013, 06:03:54 am »

I'm in here too

Kreidy818 · « **Reply #12 on:** March 03, 2013, 07:53:48 am »

thirty bucks in hand right now!!!!

Rupton88 · « **Reply #13 on:** March 03, 2013, 11:40:10 am »

Mitch put me down on the list

Mitch Keller · « **Reply #14 on:** March 04, 2013, 04:14:56 pm »

Prices are a bit higher than I thought due to the tooling in machine cost, but I am only having 25 sets made at this time.

I am also including 2 new grade 10.9 hex head Bolts that are 5mm longer w/washers (plated).

I am looking at $50.00 per set shipped.

The dang bolts are a pain in the azz to find plated, find them all day long cheap unplated.

Hotbutta · « **Reply #15 on:** March 04, 2013, 07:19:50 pm »

Bhatch21 · « **Reply #16 on:** March 05, 2013, 07:37:05 am »

Try Fastenal. They can get the plated metric flange heads bolts. No washer needed.

Mitch Keller · « **Reply #17 on:** March 05, 2013, 07:51:12 am »

Did , said nope

Glamisrider · « **Reply #18 on:** March 05, 2013, 09:16:13 am »

Try Hillco,
This is my go to and I live around the corner.

They don't have a huge selection of plated but they do have all kinds of bolts.

www.hillcofasteners.com/

(The address on the website is wrong their located on western north of garden grove blvd)

Mitch Keller · « **Reply #19 on:** March 05, 2013, 09:49:39 am »

Might be easier to go with a Chromed 10.9 Allen Head

Rider414 · « **Reply #20 on:** March 05, 2013, 10:16:11 am »

I am still in -

Mitch Keller · « **Reply #21 on:** March 05, 2013, 10:37:01 am »

Should have them ready to ship next week, heck Im excited about this.

Bhatch21 · « **Reply #22 on:** March 05, 2013, 11:55:02 am »

I don't know what size or length you need, but here's a M10x30 10.9 flange bolt from Fastenal that is zinc. They've got many others.

http://www.fastenal.com/web/products/detail.ex?sku=11115680

Mitch Keller · « **Reply #23 on:** March 05, 2013, 12:00:16 pm »

14MM X 35 - 40MM LONG X 1.500PITCH

Bhatch21 · « **Reply #24 on:** March 05, 2013, 12:02:38 pm »

Ahh, I see. No go there because of the fine pitch.

News:

Author Topic: Checking Interest on Camber Slip On Spacers (Read 1281 times)

Suzuki Quadracer HQ Store Zone